Jump to content
SAU Community

Recommended Posts

its ok pauly, i know how good your massages are. Ignore all these haters, they be jealous baby. Ps. Tell yavuz ily. You at the races on cans?

Yeah man, down at the F1. 8 of us. :D

Car got ran up yesterday with new injectors. Negative. Yavuz has pulled 35% of charge time from the coils and it still fires so that rules that out. Going to try new plugs with mega small gaps to totally rule that out then we will change springs.

Well it doesn't leave too many things it can be now . Just hope it is a plug problem , quick & easy in comparison to a spring swap .

Btw , what plugs are you running? Coppers or an electrode-less type .

I have a feeling it could be a sticky spring with these cams mate. Have they checked for bind and the progressive spring tension? With the ramp on the valve train it is a likely cause.

Seat pressures are 48 lbs on the intake and 50 on the exhaust. Not much over standard which is a bit of a shit go considering these are "Step 2" HKS. Once again, the Jap stuff is mild as!!!

Well it doesn't leave too many things it can be now . Just hope it is a plug problem , quick & easy in comparison to a spring swap .

Btw , what plugs are you running? Coppers or an electrode-less type .

Just coppers mate.

All I can say to you Paul is that I hope you fix this soon because tomorrow is F1 race day. So get a few (or lot brewskis) into ya and forget about tuning the car right now.

And yes im on to my third beer and life is good.

All I can say to you Paul is that I hope you fix this soon because tomorrow is F1 race day. So get a few (or lot brewskis) into ya and forget about tuning the car right now.

And yes im on to my third beer and life is good.

Bit hard when you're staying with your tuner ;). As for beer count... Not sure. 12 plus so far? Quiet night... Big night will be tomorrow haha

Seat pressures are 48 lbs on the intake and 50 on the exhaust. Not much over standard which is a bit of a shit go considering these are "Step 2" HKS. Once again, the Jap stuff is mild as!!!

Should be more like almost double those figures for the sort of rpm/boost you would be running. Like around 80-90 lbs. Perhaps with your new aggressive valve train/cam setup the valve springs were not spec'd correctly and your getting some valve float in that upper rpm range.

Should be more like almost double those figures for the sort of rpm/boost you would be running. Like around 80-90 lbs. Perhaps with your new aggressive valve train/cam setup the valve springs were not spec'd correctly and your getting some valve float in that upper rpm range.

We think that's exactly what's happening. I spoke to Yavuz today and when we are both sober we will sit down and talk about what we need. We also need to factor in the new cam we are going to try soon. Something around 255 @ 11.3 with a HUGE ramp, so we need a spring to be able to close the valve at high RPM.
  • Like 1

Well it seems like the logical explanation. There doesn't really seem to be too many other obvious options left that explain the problem.

Definitely sounds that way. I'll be devastated if we change then and this issue is still there.

We think that's exactly what's happening. I spoke to Yavuz today and when we are both sober we will sit down and talk about what we need. We also need to factor in the new cam we are going to try soon. Something around 255 @ 11.3 with a HUGE ramp, so we need a spring to be able to close the valve at high RPM.

Mine's do cams of similar spec if I remember correctly

  • 2 weeks later...

OK guys.

I was out at Unigroup today. New (stiffer) valve springs have been ordered. They will be here on Tuesday, hopefully installed on Tuesday/Wednesday. Yavuz wasn't there so I dont know the details but i'm sure they are more than sufficient for the task!

Now. I have some overlays

408E824D-9A03-4A70-BD6E-5B1528A30784-158

This graph is the only two runs we have done with the boost controller on so it's hardly 'optimised'. We did those two runs with the controller on when we were trying to diagnose the "miss". Funnily enough the curve starts to flatten off as soon is it does it's thing. Either way, im very happy with the midrange this thing is putting out! (No cm timing has been played with yet.... It's as the engine got put together. Also, at 19 PSI we have seen 417 rwkw. I can't remember what RPM that was at. I forgot to get a graph of that run)

5398CC6B-5BAC-4962-A3A5-4704EA38B086-158

Playing with the computer, I dug out these two graphs for a comparison. The black line is my first ever tune with the GT-RS's on pump fuel and the red line is my finished tune just before the engine died last year. Funnily enough, the boost controller was turned ON with the RS's and OFF with the -5's. Haha!

I think I need new tyres! :D

7DCAA74A-93E3-4813-B58E-41F4AC719280-158

wow! looks like a gain of 50kw @ 4krpm!

must be happy & must be hanging to drive it

so with the gtrs's u were making 200kw @ 4krpm & now you are making ~340kw with -5s & latest setup :)

what is the difference in the run with the blue line v's the brown line (in the 1st graph) or is it just 2 runs where you were trying to diagnose the miss?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...