Jump to content
SAU Community

Recommended Posts

Bit of an odd one but thought id ask the people in the know :)

From November 3rd to the 20th ill be leaving England behind and flying into Sydney then roadtripping up to Cairns and then back down to Townsville :D

I was wondering if there are any motoring events, shops, meets or just cool things to do on the trip that I may not know of from all the usual tourist information !

Any ideas will be helpful guys :)

Paul

Link to comment
https://www.sau.com.au/forums/topic/398552-queensland-coast-areas-of-interest/
Share on other sites

the sunshine coast (mooloolabah, alex heads. maroochydore and all the way up to noosa) is a good place to go. great beaches, great weather (most of the time) and plenty of things to look at (including the locals).

just watch out when you head through gympie. can't trust them shady f**kers.........

If you're using a GPS all the way up north, set it to "YES" when it asks you if you wish to opt for Toll Roads...

otherwise you end up going through Gympie 3x ;)

* Any smoke that time of year is sugar cane fires > dramatic Pics at night.

* Atherton Tableland (via train) and Treetop Walk near Cairns is worthwhile.

* Bushwalk to Babinda Boulders takes you through rainforest since you're not going as far north as Daintree

* Drive up to Castle Hill above Townsville gives you a nice view

* Airlie Beach and a sail is a good side trip from Proserpine

Geez it's been so long since I've seen my folks in Cairns - naughty naughty TT

Beaches will be big on the list but also want to see things that are special to Aus seeing as it will be a once of a lifetime trip !

GPS will be a must im assuming as although im good with maps 1200 miles in another country could be pushing the luck although you do have the steering wheel on the correct side ;)

Its all the little places that im starting to hear about that are not well publicised over here that are great so keep them coming :D

Whats the story with the Gympie place though - reputation or genreally dodgy ?

As far as Sydney goes ive been told to avoid :

Carlingford Dundas

Redfern

Blacktown

Eveleigh Street

Hyde Park

Kingscross

How true any of it is about those parts I dont knwo as im a tad too far away lol

  • 2 weeks later...

dont go to gympie, full stop. shit of a place and nothing there.

if you got a chance, go to byron bay and the north coast of NSW.nice chilled place

I highly recommended the sunshine coast and gold coast.if u got questions on the Sunshine coast, let me know im from there :D

Beaches will be big on the list but also want to see things that are special to Aus seeing as it will be a once of a lifetime trip !

GPS will be a must im assuming as although im good with maps 1200 miles in another country could be pushing the luck although you do have the steering wheel on the correct side ;)

Its all the little places that im starting to hear about that are not well publicised over here that are great so keep them coming :D

Whats the story with the Gympie place though - reputation or genreally dodgy ?

As far as Sydney goes ive been told to avoid :

Carlingford Dundas

Redfern

Blacktown

Eveleigh Street

Hyde Park

Kingscross

How true any of it is about those parts I dont knwo as im a tad too far away lol

nothing really dodgy about it, except for the fact that it's where i live, lol. if you are driving north on the highway you will go through it (highway runs through the centre of town). but yeah, there's pretty much nothing there worth stopping for. save your time for the sunny coast and noosa (an hour south of gympie)

Sydney

To do list...

* Sydney Harbour with walk on foreshore along Circular Quay and Opera House + Red Tourist Bus to Bondi Beach

* Blue Mountains for a day by getting out of train at Wentworth Falls > walk south along Falls Rd to lookout > National Pass Walk (circular)

2 days for the above are a must!

From sydney you can detour via the Hunter Valley and try some of the wineries. You can stop overnight at places like Cessnock / Pokolbin etc (clost to the wineries). Don't bother trying to get accommodation in Singleton or Muswellbrook - they're usually booked out with contractors and reps for the coal mines (and you've gone past most of the good wineries anyway)

Then you can head back up towards Brisbane via the NEw England Hwy (inland) or head back out to Newcastle and make your way up the coast. Personally I take the NE hwy to Armidale then head back out to the coast to Grafton (or you can go to Coffs). Beautiful drive over the mountain, and can be fun if there's no traffic. Just watch some of the corners as they're not all sign posted, and a couple of them tighten unexpectedly.

If you're into theme parks, then Gold Coast has plenty of them. That will be in the tourist guides anyway, so no need to go into detail about that.

The drive north of Brisbane up to Mackay and beyond is just a shit of a run. I do it about once a year, and absolutely loathe it (used to live up that way and made regular trips to Brisbane. If I never have to drive the Bruce Hwy again it will be too soon).

As for interesting things to see on the way - if you can swing an invite to the Bowdens motoring museum just north of Brisbane (Buderim), it's well worth the visit. They have many of the old race cars from the 60's through to 90's (mainly iconic Australian race cars). I'm not sure if it's open to the public these days, but worth finding out more and trying to get in for a look see.

In rockhampton you can have a steak ayny way you like it, as Rocky is the beef capital of Australia. Nothing else going for the place through, so have your steak and get the hell out of there.

Fromrockhampton, you can head inland 2-3 hrs and check out the coal mining areas. If you make it to Emerald, there are gem fields where you can buy gemstones for your mrs (we bought my wife's engagement ring sapphire from there, and had it set by a friend who was a jeweller - but I digress). From there you can head straight to Mackay via the Peak Downs Hwy - nothing to see apart from lots more coal mines (but then again the "coast" run from Rockhampton to Mackay is 343km and there's nothing much to look at there, either)

From Mackay you head up to Airlie Beach and that's where a lot of the back packers go, as well as being the gateway to the whitsinday islands. It's well worth a look and heading out for a couple fo day cruises, or even book a few nights at one of the island resorts. Beautiful blue water and white beaches. Mackay / Whitsunday area also has great seafood, so check out some of the seafood restaurants in the area.

When you get to Bowen, stop off at Joccheims bakery and order a carrot cake with a coffee. I guarantee it will be the best carrot cake you've ever tasted (even if you're not a fan of carrot cake you'll like it). Their pies etc. aren't too bad, either.

If you like surf beaches, then most of them are in the southern part of QLD (and obviously in NSW too). Once you get much further north than about Bundaberg -4 hours north of Brisbane (oh, forgot to say - stop at the Bundy Rum distillery - another aussie icon and worth it if you're a rum drinker) there isn't much in the way of surf at any of the beaches, as the islands and great barier reef kills the surf.

Plenty of other stuff I'm sure, but that gives you therecouple of other options to consider.

One last thing - pack plenty of 30+ sunscreen, and apply it every time you're outdoors. Seriously. Your pommie skin will fry in 3 minutes in the Australian sun - even on a cloudy day. We have the highest skin cancer rate in the world.

Edited by warps
  • 5 months later...

Bring your patience. There will be plenty of road works.

Cairns sky rail is good. Get out to an island or too and snorkel or fish.

Tully has good white water rafting.

Airlie beach and hamilton island are worth a look.

Steal the nuts off the bull in Rockhampton and order a reef and beef to eat.

If you decide to stay in bundaberg, bagara beach is a nice area.

Check to see if it's whale watching season. If so Harvey Bay is a good launching point. There is cheap dolphin feeding nearby too.

Auto One Kawana is hosting a car meet on the night of the 16th they get a good turn out. Check Noosa out on your way. Check out Bowdens car museum.

See if Queensland Raceways are hosting any events when in Brisbane.

Go to the Gold Coast hinterland.

Gold coast

Go on a whale watching boat , amazing when they surface right near you and give you the eyeball look , plus nice photos of the highrises from the boat

Go to the top of QM1 tower on a clear day , some killer views and photos up and down the coast /river

seaworld if your keen ?

some good food on the spit ( check gps its a block or two off the beach)

Near the GC airport the bird shows are cool if your into that , link below

http://www.cws.org.au/

the tree walk is cool as well mt tamborine I think it was

Night life is pretty good in sydney and GC just use care around kings cross late

China town in sydney for some yum lol

Western sydney can get rough

Ideal :D

Many things noted and getting researched - might stay off the Roakhampton balls though - dont want to go over my luggage allowance on the way back ;)

Cannot wait to get there now - 11 days and counting !

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...