Jump to content
SAU Community

Recommended Posts

hey guys

I have a r32 gtst and I am thinking about selling it and getting a r32 gts4 but not to sure if its worth it or not?

the reason I am posting this is because I am going to look at one today and not to sure what to look for so I have a few questions.

how can you tell if the the awd system is stuffed or not?

is it hard to install the switch to make it rwd only?

are there any major common problems that occur with them that i should look for?

also seeing as there not all time awd do all the wheels have to be the same width like evos and rexs or can you have staggered?

over all my question is,should i get rid of my 32 gtst for a 32 gts4?

any other information on them would be greatly appreciated

I have tried searching this info but I didn't come across any thing that really helped.

thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/398591-should-i-get-an-r32-gts4/
Share on other sites

i love to go GT-R but i don't exactly have the money for that haha. i know rwd is fun but id also want something that sticks to the road and im not to sure how well the gts4 performs, if its not that much better than the gtst i may as well keep it, but how i have never driven one or been in one it makes it a bit hard to decide.

If it's no good, there are plenty of other awd options out there :P

there is..

there are plenty of awd cars but there not able to switch between awd and rwd, my girlfriend has a wrx and after a week or so of driving it i get bored that's why i was thinking of getting a gts4

and not true. there are a few other brands that run a similar idea (all be it more modden).

It all depends on what YOU want from the car.

Assuming your car is stock (motor) and the gts4 is then you will find it slower than the gtst because of all the fwd gear. you can run stagered wheel sizes as long as the ROLLING diameter is the same.

So why do you want a gts4? plan on putting a rb26 or something in it?

what do you want from the car? you said grip but also the ability to use only rwd, why?

what i would want from it is to be more of an all round fun car, off track or on track if i ever took it.

i would look into putting an rb26 or a neo rb25.

so if my rims are 18/8 front and 18/9 back with 235/40 all round i can run that?

i would like to have rwd in case I wanted to try get into drifting or every now and then have a celebratory skid, but most the time i would have awd on its more to know it can do it if i want it to.

seeing as i have never driven a gts4 before i wouldn't know how much better it would handle compared to the gtst.

mate if it is going to stay RB20, then don't buy one.

they weigh more than a GTR and have the same power as a GTST.

You can't have different sized tyres either.

just like a GTR, you have to have same tyres all round.

if you have different size rims from to rear but same size tyres, that might work, but I would have thought that it still kind of alters the diameter as one tyre side wall will be more stretched than the other.

how to test if it's working? 6k revs then side step clutch.

Installing a rwd/2wd switch is piss easy.

If you are definitely doing an RB25 or 26 conversion, then fine, but even after that, you have a car heavier than a GTR.

Should you sell your GTST for a GTS4?

NO!

i would have thought a gts4 coupe would way less than the gtr? what makes its heavier?

not sure if the owner would be to happy i launch it when i go look at it haha.

if i was to get one i would defiantly swap the engine out, but if the end result ends up being a lot heavier then a gtr then i think i would rather wait until i can afford a one instead of going through the effort of working a gts4.

thanks for the help hopefully make it easier to decide.

Gtr has light bonnet and guards.

Goes a long way.

My gts4 was 1490kg

Gtr is listed as 1450kg

Gts4 feels more lively because of the gearing.

Seriously man, keep the gtst till you a afford a gtr.

Finding a gts4, then a stagea rb25 or rb26, then having it fitted will get you in to cheap gtr territory.

I almost bought a 94 r32 gtr for $12k and it turned out it had low compression on on pot.

The guy offered to go down to $10k but I still left it.

And that car had about $5k worth of turbos and associated mods to make 280awkw.

At best a gts4 will be about $5k for a nugget.

Engine conversion will be another $5k to $10k depending on what you buy and get done.

And then you still don't have the good seats or guards, bonnet, front bar.

Not worth it.

Buy my GTS4 with an RB26 already in it. Save yourself thousands of dollars in pain. Problem solvered. :)

sell it for 11k and i will haha if i had the money i would defiantly look into it. looks awesome man, looks like a shit load of work has gone in to it

you're confusing rolling diameter with width.

as long he runs the same size side wall then he will be fine.

so the width doesn't affect it at all? so long as i have the same rolling diameter all round should be fine then, i thought they would all have to be the same sizes

might just end up keeping my gtst for now anyway seeing as the gts4 i went to look at was shit house and the others are more than i can afford at the moment.

sell it for 11k and i will haha if i had the money i would defiantly look into it. looks awesome man, looks like a shit load of work has gone in to it

so the width doesn't affect it at all? so long as i have the same rolling diameter all round should be fine then, i thought they would all have to be the same sizes

might just end up keeping my gtst for now anyway seeing as the gts4 i went to look at was shit house and the others are more than i can afford at the moment.

the system uses the abs sensors to calculate if any of the wheels are spinning (slip) any faster than the others. so if you have different size rolling diameters between front/back it will see it as one set moving faster than the other and not operate correctly.

In my opinion it is better to have the same width front to back but that is just me.

Edited by Boss-zilla

Even if you have the same size tyres (235/45), I would have thought that the one fitted to a 9 inch tyre would have less rolling diameter compared to when fitted to a 8 inch rim due to the stretch in the sidewall causing the tyre to stretch a little.

but my brain works in different ways....... when it works.

Even if you have the same size tyres (235/45), I would have thought that the one fitted to a 9 inch tyre would have less rolling diameter compared to when fitted to a 8 inch rim due to the stretch in the sidewall causing the tyre to stretch a little.

but my brain works in different ways....... when it works.

well i thought the same thing so your not the only one haha, good to know that you can run staggered though, thanks for the help guys. Edited by swimming lemon

Even if you have the same size tyres (235/45), I would have thought that the one fitted to a 9 inch tyre would have less rolling diameter compared to when fitted to a 8 inch rim due to the stretch in the sidewall causing the tyre to stretch a little.

but my brain works in different ways....... when it works.

well i thought the same thing so your not the only one haha, good to know that you can run staggered though, thanks for the help guys.

you are both correct but if you had an 8 and 9 you would run a 225 and 235/45 (as example). correct width tyre shouldnt stretch.

how do you figure a 225 and 235 by 45 on an 18 inch rim would have same rolling diameter?

punch it in to here

http://www.miata.net...e/tirecalc.html

there is like a 9mm difference in diameter.

anyway.. who cares..

the answer to the question "should I sell an R32 GTST and buy an R32 GTS4?" is f**k no!

Edited by GTST

sorry i was only using the sizes as an example the point was you get the correct tyre for the rim width what ever it is but make sure the side wall sizes are the same between front back.

Should have made that a little clearer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...