Jump to content
SAU Community

Recommended Posts

Just stumbled across this, Made me laugh thought i would share.

It plugs into your cigarette lighter and instanlty save you 20% of you fuel. And saves the earth ahah,

Do people actually buy this shit?

http://www.ebay.com.au/itm/Save-20-Mini-Car-Auto-Gas-Fuel-Saver-Emission-Decreaser-Accelerator-More-/110830622927?pt=AU_Car_Parts_Accessories&hash=item19ce0518cf

anyone else think it works by lighting a light whenever it gets a certain amount of supply voltage due to increased revs, or by the same technologly as iphones and sensing how hard you accerate, therefore making you more aware of your driving style?

thats the only logical way i think it could help with economy.

anyone else think it works by lighting a light whenever it gets a certain amount of supply voltage due to increased revs, or by the same technologly as iphones and sensing how hard you accerate, therefore making you more aware of your driving style?

thats the only logical way i think it could help with economy.

nope, totally wrong. i found some stuff on the net about them. have a read/laugh for yourself

NEOSOCKET REVIEW

After scouring the internet for fuel saving products and researching them, I finally found the product that lived up to all I was looking for. All I needed to do was simply plug-in the Neosocket into my car's 12 volt lighter/accessory adapter and I immediately began to save money on gas and improved my fuel economy.

Since very few people have the financial resources to convert their cars to natural gas or fuel cell technology, Neosocket has developed a simple and inexpensive way to improve the cars we already drive. The cost of hybrid cars is not at a level we can all benefit from yet, so clever devices like this will definitely make an impact for the millions of cars already on the road today.

You won't need to go under you hood to install anything or disassemble your interior which is always a plus. It has also been proven safe for use in any car that uses a 12 volt system and will not damage your onboard computer.

HOW DOES NEOSOCKET WORK ?

The Neosocket is a new application of an old technology. Basically, it acts like a small battery that helps your car's electrical system perform better. The small device is fitted with a

capacitor that once plugged in to your 12v adapter is instantly connected to the car's main electrical system. (capacitors are also commonly used to power the electronic flash in cameras)

The capacitor first charges and then discharges the stored electricity (voltage) when there is a heavy energy demand from the alternator. Heavy energy demand (reduced voltage) is caused by using any electrical accessory in your car including lights, windshield wipers, air conditioning, stereo or any combination of them.

Instead of the alternator and battery having to work overtime, Neosocket supplements the required voltage to reduce the load on the electrical system from any accessory that is being used. The reduced electrical demand frees up energy that can be better used to deliver a more constant and steady supply of electricity to the spark plugs and ignition system.

The result is a more efficient and complete combustion of the gasoline which will improve you gas mileage and produce cleaner emissions. You will also get better horse power, acceleration, and a smoother running engine despite daily driving conditions.

The fact is that fuel mileage will fluctuate in any car due to driving habits, lack of maintenance, traffic conditions and many other factors. All these factors will rob the fuel efficiency your car was meant to achieve. The main purpose of Neosocket is to help your engine consistently maintain its designed fuel efficiency despite of all these unpredictable situations.

basically they say it's a capacitor that supplies extra charge to the electrical system, taking strain off the alternator. unless you have a dynamo off a pushbike in the place of your alternator, and a few AA batteries in the place of your car battery, i doubt you will see any difference in fuel economy.

You will also get better horse power, acceleration

seems legit :ninja: , also all p plater should get this if that claim is true.

so whos stepping up and testing this for sau?

surely there has to be some law against shit like this???

i honestly cant believe that 7 people were dumb enough to buy this magical fuel saving dildo

There is a law against it. A law that has very severe consequences...

I believe it is called natural selection.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...