Jump to content
SAU Community

Bmw Rims Stolen, They May Have Got What They Deserved

Dearlove

By Dearlove,
in Western Australia

 Share

Recommended Posts

Dearlove Collaborator

Dearlove

Posted
Posted

so i left the garage door up when i went to work this morning (my own fault i know) but when i came home i noticed the set of bmw rims i had were missing, and then saw that on they're way out they'd taken out half the wall.

not what i expected in south perth, but what ever

the rims

photo-1.jpg

the wall

005.jpg

even if it were a 4wd im sure it would have done a hell of alot more damage then they're worth

now they left some tread patterns behind, could some one identify them by chance??

003.jpg

002.jpg

001.jpg

342Four Grand Master

342Four

Posted
Posted

if the tread is still there after the rain, then take a shadow relief photo if you possibly can

clear all the debris away, then get a powerful light source shining towards the camera at a low angle to illuminate the tread pattern and shadow the other side

do it from both sides

if you can throw a ruler into the picture as well for some reference it makes it a hell of a lot easier to gauge

StevenCJR31 Veteran

StevenCJR31

Posted
Posted

Pretty ballsy coming into your garage like that and knocking off your wheels . . . . they dont muck around in midland either, sometime during the night some f*#kers went to the trouble of stealing my water tap out of my front yard,at least they turned off the water at the mains first. . .

StevenCJR31 Veteran

StevenCJR31

Posted
Posted (edited)

... Why would anyone steal a water tap...too many idiots around with nothing better to do.

you got that right. . . its the main reason why i park my line waaaay back in my yard, ppl seem to get off on randomly setting cars on fire etc

thieves even stole the copper pipe (for hot water system) off the outside wall on the rental property that im in . . .they must of got all of $5 for it at the scrap metal yard

Edited by StevenCJR31

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • hoodedreeper
      Chris' Toyota Mark ii JZX110

      By hoodedreeper · Posted

      I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
    • hoodedreeper
      Chris' Toyota Mark ii JZX110

      By hoodedreeper · Posted

      The video for the servicing and fuel filter change can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44 One of the main jobs I wanted to do before the car officially went on the road, was to remove the awful looking blue silicone hoses. There's nothing wrong with having coloured silicone hoses, but I realise as I'm getting older I prefer monotone engine bays with a splash of colour on the engine cover(s). I cover this in a lot more detail in the Youtube video, so unfortunately there's limited photos of the process. The intercooler, upper radiator, boost vacuum and upper breather hoses were all changed to black silicone with mikalor clamps. The only blue left is a blanking cap at the back of the inlet manifold and the GReddy pulleys (which will be replaced for stock when the cambelt gets replaced) While the intercooler pipes were off I gave them a quick clean/polish too A before photo I do have a replacement air filter on its way. Fuse box covers were painted blue, they're now satin black Another job on the list while the bumper was off, is to add some mesh https://live.staticflickr.com/65535/54737966256_99b28bfa30_c.jpg[/img] I was hoping to use some thin wire to secure it, but it seems I've misplaced it and the wire I had was too thick to twist easily. I ended up using cable ties for the time being https://live.staticflickr.com/65535/54737131882_c2b7989dcc_c.jpg[/img] Was pleasant to see this https://live.staticflickr.com/65535/54737131627_8b2aab13b3_c.jpg[/img] The last thing to do was to fix the front grill and re-mesh that to match but I ran out of time The Youtube video can be seen here: https://www.youtube.com/watch?v=R4FsF6tgizE&t=23s
    • Mcmannaman
      Intro/R33 owner

      By Mcmannaman · Posted

      Welcome aboard!
    • Mcmannaman
      Howdy Y'all

      By Mcmannaman · Posted

      Welcome mate.
    • Mcmannaman
      New

      By Mcmannaman · Posted

      Hi all,I already introduced myself in the Victoria section, but only saw this section now lol XD New to forums and new to skylines. Hoping to buy my new skyline within October
×
×
  • Create New...