Jump to content
SAU Community

Recommended Posts

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

hey guys, the problem went away for a few drives now its back, not as bad as before but its still there. cleaned the afm with contact cleaner so pretty sure thats fine. My question now is (assuming it is the ecu), if i take my car to get a tune up (nisstune ecu) will this hopfully rectify the problem. Do tuners usually have spare temp sensors etc on hand if it is damaged, or should i be looking at coming with an arsonal of spares.

In my opinion it's a bad idea to rock up to a tuner with a car that has problems, a tune won't magically fix it.

exactly my thought

guess ill start troublshooting, starting with the temp sensor, makes it hard when its perfect one day and playing up the next.

Ok finally got some spare time to have a look at the NIStune files for warm up timing, i found that 7+ degree's of timing is taken out during warmup up till around 3000rpm then returns to normal, So from now on everycar i do will have this timing put back in.

Kasko when we meet up in June at Eastern Creek i will fix it up for you :)

Ok finally got some spare time to have a look at the NIStune files for warm up timing, i found that 7+ degree's of timing is taken out during warmup up till around 3000rpm then returns to normal, So from now on everycar i do will have this timing put back in.

Kasko when we meet up in June at Eastern Creek i will fix it up for you :)

Sounds great thanks mate!

Thats exactly where it frees up and starts cruising.

Amazing how different it feels with 7 degrees timing

I think it was pulling far far more than 7 degrees, the map I saw had a dip from 20 down to 5 and when I looked in ecu talk it was pulling the maximum timing possible.

It doesn't do it this bad stock though, so I suspect when you start changing injectors/afms etc something else might kick in as well, unsure what.

Hey guys sorry about this, just making sure im following correctly. So its due to my ecu taking timing out when in warm up mode below 3000rpm. But because my car does this sometimes even when hot then this would suggest a temp sensor is possibly damaged telling the ecu the cars cold when really its warmed up, at random times at that?

Ok finally got some spare time to have a look at the NIStune files for warm up timing, i found that 7+ degree's of timing is taken out during warmup up till around 3000rpm then returns to normal, So from now on everycar i do will have this timing put back in.

Kasko when we meet up in June at Eastern Creek i will fix it up for you :)

No wonder mine started doing it as soon as i put the smaller turbo on. You bad boy you.

Hey guys sorry about this, just making sure im following correctly. So its due to my ecu taking timing out when in warm up mode below 3000rpm. But because my car does this sometimes even when hot then this would suggest a temp sensor is possibly damaged telling the ecu the cars cold when really its warmed up, at random times at that?

I am of the opinion there are two maps, cold start and sort of cold start as mine still pulls timing when I drive the car about 5-6 hours ago, eg in the morning it is fine (stone cold) if I leave work early it does it though the warm start map doesn't pull anywhere near as much timing and doesn't really bother me.

The other option is yes your temp sender is stuffed, is your fuel economy ruined? Plug in a consult cable and check the fault codes (not 100% reliable), or simply just check the output when cold and when hot with a multimeter, it should vary.

Edited by Rolls

table is what I meant not map.

There is a cold start and warm start timing map, these are the two that do the retarding. The warm start one is much less aggressive, I'd just duplicate it in the cold start map and then take a few degrees out of the warm start one.

Lots of other handy tables though, coolant temp ignition and fuel tables for when the car gets hot, I put big numbers 110c degrees cell and a bit in the 100 so if it overheats in summer I don't blow it up.

Edited by Rolls

took the car for a drive tonight. noticed the temp guage went up to where it normal goes (did take about 10mins to get there - way longer then it should be) and down then stayed only about 1/3 way up and wouldnt get up to the normal place where it sits. also when it was down the car was boggy and when it was up (briefly) the car ran alot better. obviously after 20mins driving my car had warmed up. my question is does the temp sender also tell the thermostat to open up. or is it my thermostat is not working correctly therefor the sensor telling the ecu if the cars at operation temp yet is getting tricked.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...