Jump to content
SAU Community

Recommended Posts

Ok so im running out of space at my place so am selling all the stuff that i have pulled off the gtr since iv had it. this includes all the twinturbo crap, the only things you would need is turbos and water/oil lines, maybe a few nuts and stuff, but all the piping and exhaust stuff is there. pm me if interested.

Also have K's pods to suit gtr, bolts onto the afms. $80

I also have a spare plenum to suit gtr, no throttles or anything, just the plenum. $50

Standard GTR fuel rail. $40

2x Standard fuel regs $20 each

2x GTR Bov's. will only sell as pair. Pm me an offer.

poope you are no fun. i need a bit of stuff as previous owner hacked away at mine to add the atmos ones i have. Car will be going into ultimate tunes soon anyway to get a bit more done so ill take a proper look as to what i need when the front bar is off haha

4 SSR MK1's

Size: 15"x6.5"

Offset: +11 (Type B)

PCD: 4x114.3

Price: $650

Comes with a set of new shank nuts and washers to suit toyota wheel stud thread.

Since I got these I pulled out all the rusted nuts and bolts for the wheel centres and put new ones in.

One rim has a minor dent on the outer lip. Wicked wheels out in qbn should be able to fix it real cheap if you don't want to have a crack your self. If I get it fixed I will be asking a lot more for them.

These are great rims for an old school look and your missus can use them as a mirror to do her make up.

Photo085_zps5beb0c05.jpg

Edited by azathoth

I have some parts lying around forsale

Genuine GTR Door Sills - $250

post-100668-0-38415700-1361156780_thumb.jpg

Please pm if interested

So found out they are for a R34 GTR....

Going to put up on eBay pm if wanting this.

Edited by ScR33m3r

Series 2 R33 Front bar indicator/fog light combination

White lens covers,

Electrics work fine.

Light scratches from moving around on lens covers but easy to sand and paint over.

$180 ono

Pm if any questions or anything

post-100668-13674038368841_thumb.jpg

post-100668-13674038680154_thumb.jpg

R33 GTR Carbon fibre faced gauge din set.

Brand new been sitting around for a while

$250 ono

Pm any questions or anything

post-100668-13674039759231_thumb.jpg

post-100668-13674039987116_thumb.jpg

R34 GTR Door scuff Sills

Brand new

Thought they were for a R32 but didn't fit either R32 and R33

$250 ono

Pm any questions or anything

post-100668-13674042080277_thumb.jpg

Selling helga 96' R33 Skyline GTST - Have advertised on for $4250 with a decent amount of interest. I wouldn't want to go below $3,000 ono. as the car works perfectly fine and drives straight, pits just failed the chassis (among other minor things) - Can be registered in NSW, rego runs out 4th of May 13'. Not sure if I'm asking too much for $3,000 for SAU members but a starting price has been given. Cheers

Selling helga 96' R33 Skyline GTST - Have advertised on for $4250 with a decent amount of interest. I wouldn't want to go below $3,000 ono. as the car works perfectly fine and drives straight, pits just failed the chassis (among other minor things) - Can be registered in NSW, rego runs out 4th of May 13'. Not sure if I'm asking too much for $3,000 for SAU members but a starting price has been given. Cheers

interested in a 68 hilux?

plus a little cash your way?

needs paint attention, but mechanically very good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...