Jump to content
SAU Community

Recommended Posts

Hi Everyone,

Not sure if this is the right place to advertise this - let me know if not. Ad is also on 'Whole Cars sale page' with pics etc.

Immaculate R32 GTR for sale

Spent plenty as you do, someone else's chance to enjoy.

333kw (At all Four @ 21 PSI.)

For those that like the detail, let me know and I can provide you with the full list (all internals no expense spared.) Shortened version as per below;

Fully overhauled engine, Balanced and Blue printed (Engine built by Pace Pace Motorsport in Melbourne Tuned by Ed @ Autotech Canberra)

Tomei cams (260-9.15)

Trust high volume sump

Remote oil filter and oil cooler

25/30 parallel HKS Turbos

CES ceramic dump pipes and full high performance exhaust system

Nistune Ecu

HKS Launch Control & torque splitter

Turbo smart eboost

Overhauled gearbox

Excedy triple plate clutch

Koni adjustable suspension

Full customer GTR interior

18 inch Simmons Alta wheels

No money to spend and everything works. Low k's since engine build (has 173,000 on the clock.)

Currently engineered and registered in NSW. All extras and spares supplied with car

Located NSW Far South Coast - Will travel to Canberra for genuine inspection.

$34,900

Reasonable genuine offers considered

post-32547-0-09160100-1420591279_thumb.jpgpost-32547-0-26610600-1420591288_thumb.jpgpost-32547-0-24322700-1420591240_thumb.jpgpost-32547-0-52976600-1420591252_thumb.jpgpost-32547-0-03544100-1420591265_thumb.jpgpost-32547-0-37633700-1420591306_thumb.jpgpost-32547-0-89583200-1420591314_thumb.jpg

post-32547-0-00168200-1420591211_thumb.jpg

post-32547-0-22964000-1420591299_thumb.jpg

post-32547-0-52346200-1420591323_thumb.jpg

Hi Guys,

R32/R33 GTR Apexi Power FC (without Hand controller) $600

2x Z32 AFM (Practically Brand new, done like 2000km) $250 for the pair.

Also still have a set of standard injectors, Standaird Airbox (missing 1 clip) and a set of Apexi pods. PM for more details.

Have an Ogura twin plate clutch here with plenty of meat left on it still. Not using it anymore as I've gone to a quad plate.

Suitable for an R32 GTR.

Don't have the bearing from the centre but they're not that expensive or hard to get. $400, prefer local sale.

Push type

^^ Lots of interest but I still have this and want it gone!

I have some (badly) polished cam covers to suit rb26. Have both cam covers, timing cover, plenum and twin turbo pipe. Dont have a coil pack cover though. Ideally want to see if someone wants a head start instead of polishing theirs. Will swap for painted ones (dont require plenum or twin turbo pipe though). Will get pics when im home in a few weeks if required

god damn why cant it be the passenger side speaker cover!!

Should be able to help you out Nate

Replacing door card in my 32/4 and I'd say the speaker cover will fit

Let you know when it's swapped over

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...