Jump to content
SAU Community

Recommended Posts

For sale:

Greddy catch can. 1L capacity. - $50 SOLD pending pickup and payment.

HKS Super blow off valve with pipe (This is the first gen model). Suit Rb26dett. These are non flutter type (Just dumps the air in 1 go) Atmospheric. These are the high load BOV for use with more power -$100 for both with the pipe.

Standard RB26dett Injectors - $250. Also have fuel rail to suit if need be.

Standard R32 GT-R Airbox with new filter. $200 SOLD pending pickup and payment.

Boost controller $50 SOLD pending pickup and payment.

Also have Two apexi pod Filters (used) someone can have both for $50.

Also have stock cams for a 26dett as well.

Can get pics of the other items if people interested.

For sale is a R34GTT Nistuned ECU.

Comes with the ECU case plus the Nistune daughter board already installed by a Autotech in Hume. With teh daughter board installed up probably just need to tune it depending on what your running.

Nistune was tuned with exhaust and intercooler can be tuned to high hp applications. Selling because i have a standalone now.

$280

0417764194 or PM

Located in Canberra

oh and I have absolutely no spare parts left for R32 GTR's as of earlier today.

all Given away, Sold or dumped in the trash :banana:

I do however have a very clean garage :thumbsup: (not for sale :P )

Did he buy an ECU already ??

Edited by Sinista32

Also, I have some old EB games super banners ( The ones that take up the whole window space) for sale. I have the following:

Modern warfare 2

Battlefield 3

Bioshock 2

Splinter cell conviction

Gears of war 3

$10 per poster if people are interested.

Could try to get pics if you want :\

Updated list

- Apexi SAFC (Black) - $250 used
- GCG GT30 0.82 rear housing (internal wastegate) - $350-$400 NEW

- HKS SSQV (comes with circlip/2bolt mount to fit RB25DET standad BOV position $100 used
- Stock RB25DET ECU - $120 used
- Stock RB25DET Air Flow Meter - $120 used
- 2x Federal 595SS 245/45ZR18 (lots of tread) - $100 used
- Tein HA Coilovers to suit R32 GTST rear pair(need shocks rebuilt) - $100
- Trust Airinx air filter (should suit stock skyline AFM)- $100

- Greddy Profec B Spec 2 boost controller- $300 used - SOLD

- wastegate actuator 12PSI w/bracket - $100 NEW - SOLD

- 5 bolt dump pipe - mild steel - $150 NEW - SOLD
- Oil cooler/relocator kit (fits RB) - $180 used - SOLD
- R32 GTR wing - Dark metallic blue - $150 used
- Kinugawa TO4E oil drain - $50 NEW
- SOLD

- Nissan R31 Skyline Wagon (Series 3) - $1200 ono - SOLD

All prices quite negotiable. please give me an offer.
PM, text or call 0431900505.

may forget to check this for a while so please PM, text or call


will post pics eventually, can send pics if requested

Would prefer local sale
located in Woden, ACT

Cheers
Simon

post-27427-0-78494500-1365815252_thumb.j post-27427-0-99454600-1365815254_thumb.j post-27427-0-07171800-1365815264_thumb.j post-27427-0-04689000-1365815266_thumb.j post-27427-0-52514000-1365815273_thumb.j post-27427-0-44306300-1365815275_thumb.jpost-27427-0-50180600-1365815277_thumb.j post-27427-0-61105500-1365815279_thumb.j post-27427-0-52966400-1365815281_thumb.j post-27427-0-55363300-1365815388_thumb.j post-27427-0-47027000-1365815392_thumb.j post-27427-0-22023400-1365815394_thumb.j

Also have these to sell:

- Fender Stratocaster:

made: 1992-93

used but in good condition

looking for $600

- Yamaha RBX260

used, bought new, well looked after.

hoping to sell with 50W Peavey Microbass amp

Great starter package

Looking for $400 for both.

Can separate for the right price.

All located in Woden ACT

PM or Text: 0431900505

post-27427-0-75861400-1365816450_thumb.j post-27427-0-26886900-1365816453_thumb.j post-27427-0-49245900-1365816455_thumb.j post-27427-0-43758400-1365816457_thumb.j post-27427-0-43018900-1365816460_thumb.j

For sale:

Greddy catch can. 1L capacity. - $50 SOLD

HKS Super blow off valve with pipe (This is the first gen model). $100 for both with the pipe.

Standard RB26dett Injectors - $250. Also have fuel rail to suit if need be.

Standard R32 GT-R Airbox with new filter. $200 SOLD pending pickup and payment.

Boost controller $50 SOLD

Also have Two apexi pod Filters (used) someone can have both for $50.

Hyosung GT250R $1200 with rego. Can PM pics if interested. See earlier post for details.

Also have stock cams for a 26dett as well.

Can get pics of the other items if people interested.

For sale:

Greddy catch can. 1L capacity. - $50 SOLD

HKS Super blow off valve with pipe (This is the first gen model). $100 for both with the pipe.

Standard RB26dett Injectors - $250. Also have fuel rail to suit if need be.

Standard R32 GT-R Airbox with new filter. $200 (Back up for sale)

Boost controller $50 SOLD

Also have Two apexi pod Filters (used) someone can have both for $50.

Hyosung GT250R $1200 with rego. Can PM pics if interested. See earlier post for details.

Also have stock cams for a 26dett as well.

Can get pics of the other items if people interested.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • (it is a brand new ported mellings pump) I suspect the lack of pressure is due to the leak. It was *not* that low in other logs of oil pressure in the past. It wasn't that hot either, but not far off.
    • Would a Mellings oil pump be a viable option  From my time with a LS, and talking to tuners and LS specialists, the "weak" OEM oil pump is one of the first things they recommend to swap out if I was going to give the engine any high RPM I opted for a Mellings high volume, with the high pressure springs and I never had a issue with it Cost wise they are not expensive in the scheme of things 
    • Just bought a 2002 Stagea 250tRS VR-X Four AERO VQ25DET and spent the last two weekends cleaning and detailing it.. still have to do the wheels and the engine bay but the rest of it came up nice. Imported 2011 to S.A. and I'm the third owner since it was imported. I met the guy who brought it over, he went to Japan and picked out the car, bought it and ordered the wheels. He also gave me a list of stuff he did to the car with receipts. Coil overs (I have the original springs), 3" exhaust from the dump pipe back no cat, Custom dump pipe,(I have the original exhaust), Plenum spacer, 18" custom Work XSA wheels (need restoring, I've made a start..), Shift kit put through the 5 speed tiptronic auto, TV and menus/screens changed to english, Australian DTV tuner installed in rear. I've just had four new discs and new pads as well as all the fluids including the brake fluid replaced. I have all the receipts for the last 15 years and the import papers in a nice folder. Car looks great, goes like hell but fuel economy is not a thing lol.. pics next..
    • I ended up in this rut again lol, and used a shit ton of filler. One thing I can't understand is, even after using a big long block and going in long X pattern strokes, I always end up at bare metal again with no filler, and my repair started at one end of the door and now I've chased my tail to almost the other end of the door. I was thinking of hitting the panel with a hammer where it might be a high spot and making everything low then filling it, I did this on a small section on my other door by mistake and I think I fixed it lol. Is this a bad idea? The other thing is with guidecoat, whether it's the powder or spray, after I sand all the guide coat off, it doesn't reveal anything for me in terms of high spots and low spots and makes it especially hard when it's bare metal (at least in powdered form), am I doing something wrong here, or likely a high spot I keep going over and creating valleys? Lastly, stupid question but, is it possible that after sanding if I only sand over the filler area where I know to be a dent that it's impossible for me to dig into that dent? Unless there are other problems which I missed.  
×
×
  • Create New...