Jump to content
SAU Community

Recommended Posts

Microtech LT12s has an AUX output, you need to set up a relay thats triggered from the output, the AUX can be set with RPM on and off. Should see a decent midrange gain from the VCT, it will have to be retuned.

Edited by 51NNA

Nothing wrong with microtech's, i've had 3 car that run them! They never gave me any problems an did everything i needed it to do, no point in buying a ecu with all the bells and whistles if u never use them!

fark it annoys me when ppl post garabage like this about computers... Im sure it will do more then enough for what most ppl neeed.... I never had a problem...

Doesn't mean it is a good idea to run it !

I bet I could set up a carby blow through set up on my rb25 and it would be "good enough" and if it worked I could say "without a problem" as well.

The stock ECU has better tunability than a microtech, it has more features and does an all round better job at every single part of running a car.

You have paid money for a down grade.

Nothing wrong with microtech's, i've had 3 car that run them! They never gave me any problems an did everything i needed it to do, no point in buying a ecu with all the bells and whistles if u never use them!

You are right I don't ever use my nice cold start, my idle air valve control that automatically adjusts when the AC comes on, I also don't need fuel economy via an O2 sensor.

Actually Rolls, fuel economy is one place where it is so much easier with a Microtech than with Nistune. It's really hard to lean out the cruise section in Nistune. It's a doddle with a Microtech.

You cannot argue against the statement that a Microtech actually does a decent job of running a fairly simple engine like an RB. Sure, you miss out on a few things, but they do work, and are fairly easy to tune (once you're used to their arse backwards electronic carby way of doing things). I'd much rather have a Microtech than pretty much any Haltech that's ever been released.

Yeah I know they work, but the lack a lot of the handy factory features that the factory ECU has. You can lean out cruise on a nistune the same way if you want, just turn off O2 feedback and pull fuel out until you are happy, or if you are lazy just leave the O2 feedback on and it'll be about the same as the factory fuel economy if you don't stuff things up too much.

  • 1 year later...

quote by rolls, "I like to construct strong views on random things, and then argue for absolutely no reason about them." some one needs a hug? anyone in Adelaide can help out?

before you flame me rolls, i agree with you about functionality of the nistune, however they carry an awsome reputation for results built from racing results! They are designed for high reving rotary's with fast and reliable processing time.

  • Like 1

quote by rolls, "I like to construct strong views on random things, and then argue for absolutely no reason about them." some one needs a hug? anyone in Adelaide can help out?

before you flame me rolls, i agree with you about functionality of the nistune, however they carry an awsome reputation for results built from racing results! They are designed for high reving rotary's with fast and reliable processing time.

Awesome rep from back in the day when they were a great ECU, it is like getting a magazine from the 90s where windows 95 and a pentium 200 was amazing, doesn't mean it still stands up that well today, sure if all you want to do is run excel from the nineties it probably does it well (eg running a rotary that used to be carby fed), but once again doesn't mean it is great today.

There "fast and reliable processing time" is slower and no less reliable than any new ECU.

Edited by Rolls

They are an absolute bucket of shit. Customer support is pathetic, you can't do a thing with them unless handing over wads of cash and the software sucks balls. We had to send a rb25 one back to get something as simple as a thermo fan output enabled, which is yet something else they charge you for.

The vct can be turned on and off in the aux screen.

Actually Rolls, fuel economy is one place where it is so much easier with a Microtech than with Nistune. It's really hard to lean out the cruise section in Nistune. It's a doddle with a Microtech.

what? just highlight the cells you want and press 'O' then drop the value to whatever you want.. it's dead beat simple... I've used Microtech before, it's so damn confusing.

1x table for RPM vs. Timing, then 1x table for Timing trim vs. Load... no sure why they just didn't want to use a 3D map like other people.

what? just highlight the cells you want and press 'O' then drop the value to whatever you want.. it's dead beat simple... I've used Microtech before, it's so damn confusing.

1x table for RPM vs. Timing, then 1x table for Timing trim vs. Load... no sure why they just didn't want to use a 3D map like other people.

Yup. Unless you wanted to keep closed loop. And perhaps you've not tried to do it on a more modern Nissan ECU? VE tables make it hard to know if you're achieving anything at all. You can't switch off feedback on a per cell basis on those anyway.

I'm not defending Microtech by the way. They are unpleasant to tune, as I stated in my original post. But especially back when the only Nissans being played with were RB20s and CA18s, they did a good job, and did return excellent fuel economy - far better than stock.

Yup. Unless you wanted to keep closed loop. And perhaps you've not tried to do it on a more modern Nissan ECU? VE tables make it hard to know if you're achieving anything at all. You can't switch off feedback on a per cell basis on those anyway.

I'm not defending Microtech by the way. They are unpleasant to tune, as I stated in my original post. But especially back when the only Nissans being played with were RB20s and CA18s, they did a good job, and did return excellent fuel economy - far better than stock.

I do find that the Nistune O2 closed loop is funny, it's quite lazy. I prefer to just set at stoich of the bat for idle/cruise etc. and I turn it off as it comes on song. It tries to stoich coming onto boost which makes the car feel lazy. I've only ever used it on a R33 and S15s nothing newer so perhaps you're right.

Do many people tune nistunes with the O2 feedback off?

you always need to disable O2 feedback whilst tuning, then re-enable it once you're done.. however I just leave it off completely on the idle/cruise cells.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...