Jump to content
SAU Community

Recommended Posts

Hi guys and girls,

Im having some problems with my fuel system. My car on the dyno is making 300 RWKW but if the workshop tunes it more than that the car physically runs out of fuel. The fuel system spec's as follows

- New areomotive stealth 340 intank pump.

- Reconed 8 (something) cc injectors.

- New fuel filter.

- Stock fuel pressure reg.

The fuel pump has been wired up right using 10g wire and a 30A relay as per instructions and has been install and place on the bracket so it reachs bottom of the tank.

I called the guys that sells the pumps and said that they are happy to test and replace if needed but he commented that they haven't heard of a faulty one nor did he say its not possible and that that pump should be ok for the job. But im in the process of elimination. But i want to know how much can the stock fuel reg make?

Any help would be great!

Many thanks

Link to comment
https://www.sau.com.au/forums/topic/400325-out-of-fuel/
Share on other sites

I've seen the stock fuel reg make well over 300kw before. My tuner said he uses the stock fuel reg in most applications if he can, and he tunes some serious cars. So unless there is a problem there, I doubt it is your reg. What duty cycle are the injectors being run at?

I'd be looking at the pump.

Link to comment
https://www.sau.com.au/forums/topic/400325-out-of-fuel/#findComment-6359075
Share on other sites

^ same thing i was thinking.

Either way it won't be the stock reg causing a problem unless it's stuffed as they will hold a lot more with correctly sized injectors... It can be checked in a few seconds with a pressure gauge (assuming they have done that already given how easy it is).

Link to comment
https://www.sau.com.au/forums/topic/400325-out-of-fuel/#findComment-6359112
Share on other sites

Here's the funny thing.....because the stock fuel reg is in the return path to the tank, it can NEVER BE A LIMITATION on the max fuel flow through the injectors. Because at max demand, the regulator is in fact closed, no fuel is flowing back to the tank, it's all going through the injectors.

Did anyone hook up a fuel pressure guage while tuning this car?

Link to comment
https://www.sau.com.au/forums/topic/400325-out-of-fuel/#findComment-6359453
Share on other sites

  • 1 month later...

so fuel pump wiring ?? was your pump direct wired to battery ?

"The fuel pump has been wired up right using 10g wire and a 30A relay as per instructions and has been install and place on the bracket so it reachs bottom of the tank."

Link to comment
https://www.sau.com.au/forums/topic/400325-out-of-fuel/#findComment-6445387
Share on other sites

I can see where you're heading with that.. He doesn't actually say where it's wired up to. As far as we know, the instructions part of - "The fuel pump has been wired up right using 10g wire and a 30A relay as per instructions" - could be completely wrong.

OP, did your tuner end up giving you feedback on your IDC/flow test results?

Link to comment
https://www.sau.com.au/forums/topic/400325-out-of-fuel/#findComment-6445931
Share on other sites

  • 3 weeks later...

It was all set up right. The wiring required power from battery to relay then a signal wire to the relay but the negative wire from the pump need to go to the body instead of the returning to the wiring loom. But one of the plug that go into the relay wasn't soldered right so we re-soldered it and all is good now. If you would like to see the wiring instructions just Google the pump (stated in my first post).

Link to comment
https://www.sau.com.au/forums/topic/400325-out-of-fuel/#findComment-6471253
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also seen this as an option 
    • I get you, we’ll see I’m aiming for 200ish kw now and hopefully 300rwkw down the line after some upgrades maybe like headstuds, E85 flex fuel etc  so trying to make it final for that now, I can get a GTT airbox for $280 so it’s not too bad but not sure if there’s better ways to spend that money. I seen online they say pod filter which isn’t enclosed isn’t good especially for a plus T.      hard to say what to do
    • Meh. How much power can you make from a +T anyway? I wouldn't have though it would be enough to challenge the airbox. It's not as if it's tiny compared with the turbo one. As to putting a pod in a stock airbox .... it's not the filter element that would be restrictive. It would be the air inlet to the box that would be the narrow point, which you could open up regardless of what element was inside. On my R32 I opened up the sort of triangular opening in the bottom front corner of the box, deformed (heated, moulded) some 4" stormwater pipe to fit to that opening and punched a 4" hole down through the inner guard to the spot where the stock intercooler used to be. This was purely in the search for a cold intake, but you could do something similar if you need to open up the inlet side of it. The AFM tube size is the same for both NA and turbo, so the outlet from the airbox is same same anyway. If you're going to do the right thing, then an aftermarket ECU won't care about the AFM (ie, you can get rid of it). But even if it was still there, people pull >300rwkW through them all day, and I suspect you won't be going there.
    • R34 RB25de Neo by the way ^ 
    • Doing a +T on my car and I’ve read the precious forums lots of mixed reviews from sometime back.  checking if anyone has any ideas for airbox or enclosed pod filter or solutions?  I was thinking stock GTT box but some say it’s restrictive? I seen some people try fit in a pod in the box anyone done that recently?  not any good enclosed options ? Thanks 
×
×
  • Create New...