Jump to content
SAU Community

Recommended Posts

IM PARTING OUT MY 1994 R32 GTR , CLUSTER SHOWS 62000KMS

MOTOR HAS BEEN SOLD

Apexi power intake pipes with apexi filters and z32's with plugs $450

Gearbox pull type being 94 model $600ono

Hks oil filter relocater and oil cooler all hoses $450

Rear diff and half shafts $500

Front bar reinforcement $120

Seats front and rear the front seats need retrim but besides that all good with rails $400

Alternator $100 , Starter motor $80 Ac compressor $80 , power steer pump $80

Bootlid with wing in white has a dent or two nothing major $150 ono

Front and rear calipers and discs and braided lines $550 ono

Front cv shafts $200 for both ono

rear tail shaft $120 ono

front pipes 2.5 inch to 3 inch at cat slight scratches from speed bumps $80

3.5 inch cat back one muffler and cannon great sound $450 ono

Heaps still left pm for prices and availability

IN SYDNEY WESTERN SUBURBS PICK UP ONLY

PRICES MAYBE NEGOTIABLE - NO LOW BALLERS PLEASE

Forgot still have front and rear subframes

Hubs abs sensors tail lights

Master cylinder and booster

Clutch master and booster

Abs module fuel tank

Pm for info

Front reo sold, front bar sold , guards sold

Headlights sold , engine sold , grill sold ,

Wheels sold

Inter cooler that's up has some bent fins and some bugs but no leaks 4 inch thick 150 pick up

If your chasing something do your 32 pm me

Also has adjustable coilovers

Will have brand and pics up by tomorrow

Interested in the coil overs if you can let us know what brand, specs etc.

Coil overs sold , fuel sender sold

Fuel pump still available 50 bucks

Fuel tank 80 bucks with straps

Full brake set 450 Calipers discs front and rear

Brake master cylinder and booster 150

Clutch master cylinder booster and hydraulic pipes 150

Abs module 100 bucks

Rhf plastic guard liner complete 50 bucks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...