Jump to content
SAU Community

Recommended Posts

Hey guys, I have decided to try and retrim the interior fascia on my SII R33 and also the surround on the driver's side power window.

Anyone done this before?

I was thinking a carbon fibre weave look, done in stick on vinyl.

Or does anyone know where it can be done.

Thanks heaps.

- Mark -

I'm pretty sure The Spoiler Shop do this, as they painted my dash plastics for me (Could of really attempted it myself after looking at the procedure, but wouldnt of got the great results).

I know it costs more then just a strip back + paint, around 300 for all the plastics, but they do a good job.

I also know of some people in the eastern states who got some carbon fibre type of contact and did it themselves but apparently very time consuming! Good luck

redoin the dash and other hard plastic bits is pretty easy the only real problems i had when doin mine was gettin the origional coatin off the its just a matter of platic primer and get a paint guy to mix up a few spraypaks of your color for the best finish spray it with clear afta it took me a weekend to go from s#@$y worn dash to nice silver blue and not to many swear words either

I can do it myself but problem is I don't have a workshop to do it. And doing it in an open space at my place means while paint is drying dust/dirt particles could landed on the surface and spoil the result. I had this done on my speedo surround, because it was a small part, as soon as I spray it I took it inside and cover it with a box. Dash facia is a different story as it's way too large to find a box to fit to cover it. So I'm sticking with black on mine, but silver would be nice.

Seen blue, red, carbon fibre texture (stick-on) but never seen gunmetal. Anyone tried gunmetal before?

The easiest & cheapest solution to the scratched dull grey look , is to scrape off all of the grey paintlike finish & polish the black plastic underneath :D It's a bitch of a job , but looks great in shining gloss black :P

Thanks Bro, that's a top tip ! :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...