Jump to content
SAU Community

Recommended Posts

Staying blue , the door jams are blue and i cbf painting all of it :) . I swapped another 25 turbo on it today , it has the same bloody noise , so im just going to register it and change the whole induction setup , im putting all the goodies from the cefiro on it so it should see Atleast 250rwk , might even go for a ethanol setup since it will be used on the track mainly . I also put new coilovers in and bought some 33 gtr rims which i plan on using instead of the buddy clubs :) . Now i just need to pick up a bonnet and she will be ready for rego!

No luck fixing the turbo , started it with just the housing on and it was noisy , took the housing off and it was all good , put the other housing i had spare on with no piping all good , put the piping back on and the noise was back . So i won't be making the drift practice in a fortnight , rego next week then td06 etc may aswell go on and see if that fixes it! . Also tried to put some subframe bushes in but someone has over tightened the nuts that hold it up , with all the proper stuff i still managed to round the nut off so i gave up for the afternoon! . Another point of interest for me was , whilst it was on the hoist i noticed it had excessive movement in the right rear wheel , but im not looking into it until Friday 13 is over!.

Yeah i still haven't worked out the image thing , you're quite welcome to explain lol

So you need to sign up for one of their accounts.

Only takes a few seconds.

Then once you log in and upload the image.

You have to use the "Direct Link" URL they have as an option.

Then come here and click on that little picture thing

Its just below the smile face when you are creating a post.

and paste the link in there.

Done :)

**unless you are on a phone and then ur f**ked

  • 2 weeks later...
  • 5 months later...

It's been a little while since i updated this thread , mainly because of this:

post-20231-0-06900600-1357820764_thumb.jpg

State champ for 2012 yiew!!

Anyways , back onto skyline stuff . I have saved and bought a whole sh*t load of stuff to fit to this thing, list goes:

Td06sl2-20g 8cm kando (trust copy)

no name - ebay looking , high mount manifold (not sure i want to use this tbh)

Z32 afm

Power fc

gtr injectors

adj castor rods

rack spacers

oil cooler

r33 front lca's

adjustable upper control arms

2 way diff (pinched out of my cefiro)

R33 gearbox

rear pods for some rice

adj cam gears that i probably won't fit

some old skool guages (omori/greddy etc)

de-cat

gtr seats (which i might not use yet , i think my ceff would love them)

and a few panels and other bits and pieces.

I've finally been allowed to take holidays from work so it's time for me to do some work to it!!

so far i have fitted a new bonnet to it , rear bar and put most of the trim i pulled apart back together

pics:

post-20231-0-42074000-1357821837_thumb.jpg

post-20231-0-26105500-1357821844_thumb.jpg

post-20231-0-16647800-1357821850_thumb.jpg

post-20231-0-73985200-1357821853_thumb.jpg

ready for rego now! , all i need is the $$ to pay for it , then it's game on for getting all the goodies fitted , fingers crossed it will be ready for the Feb 9 drift practice! (although i don't think i will quite have the time )

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...