Jump to content
SAU Community

Recommended Posts

Staying blue , the door jams are blue and i cbf painting all of it :) . I swapped another 25 turbo on it today , it has the same bloody noise , so im just going to register it and change the whole induction setup , im putting all the goodies from the cefiro on it so it should see Atleast 250rwk , might even go for a ethanol setup since it will be used on the track mainly . I also put new coilovers in and bought some 33 gtr rims which i plan on using instead of the buddy clubs :) . Now i just need to pick up a bonnet and she will be ready for rego!

No luck fixing the turbo , started it with just the housing on and it was noisy , took the housing off and it was all good , put the other housing i had spare on with no piping all good , put the piping back on and the noise was back . So i won't be making the drift practice in a fortnight , rego next week then td06 etc may aswell go on and see if that fixes it! . Also tried to put some subframe bushes in but someone has over tightened the nuts that hold it up , with all the proper stuff i still managed to round the nut off so i gave up for the afternoon! . Another point of interest for me was , whilst it was on the hoist i noticed it had excessive movement in the right rear wheel , but im not looking into it until Friday 13 is over!.

Yeah i still haven't worked out the image thing , you're quite welcome to explain lol

So you need to sign up for one of their accounts.

Only takes a few seconds.

Then once you log in and upload the image.

You have to use the "Direct Link" URL they have as an option.

Then come here and click on that little picture thing

Its just below the smile face when you are creating a post.

and paste the link in there.

Done :)

**unless you are on a phone and then ur f**ked

  • 2 weeks later...
  • 5 months later...

It's been a little while since i updated this thread , mainly because of this:

post-20231-0-06900600-1357820764_thumb.jpg

State champ for 2012 yiew!!

Anyways , back onto skyline stuff . I have saved and bought a whole sh*t load of stuff to fit to this thing, list goes:

Td06sl2-20g 8cm kando (trust copy)

no name - ebay looking , high mount manifold (not sure i want to use this tbh)

Z32 afm

Power fc

gtr injectors

adj castor rods

rack spacers

oil cooler

r33 front lca's

adjustable upper control arms

2 way diff (pinched out of my cefiro)

R33 gearbox

rear pods for some rice

adj cam gears that i probably won't fit

some old skool guages (omori/greddy etc)

de-cat

gtr seats (which i might not use yet , i think my ceff would love them)

and a few panels and other bits and pieces.

I've finally been allowed to take holidays from work so it's time for me to do some work to it!!

so far i have fitted a new bonnet to it , rear bar and put most of the trim i pulled apart back together

pics:

post-20231-0-42074000-1357821837_thumb.jpg

post-20231-0-26105500-1357821844_thumb.jpg

post-20231-0-16647800-1357821850_thumb.jpg

post-20231-0-73985200-1357821853_thumb.jpg

ready for rego now! , all i need is the $$ to pay for it , then it's game on for getting all the goodies fitted , fingers crossed it will be ready for the Feb 9 drift practice! (although i don't think i will quite have the time )

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...