Jump to content
SAU Community

Toffs Track Hack - R32 Love

toffy
 Share

Recommended Posts

toffy Veteran

toffy

Posted
  • Author
Posted

Staying blue , the door jams are blue and i cbf painting all of it :) . I swapped another 25 turbo on it today , it has the same bloody noise , so im just going to register it and change the whole induction setup , im putting all the goodies from the cefiro on it so it should see Atleast 250rwk , might even go for a ethanol setup since it will be used on the track mainly . I also put new coilovers in and bought some 33 gtr rims which i plan on using instead of the buddy clubs :) . Now i just need to pick up a bonnet and she will be ready for rego!

toffy Veteran

toffy

Posted
  • Author
Posted

No luck fixing the turbo , started it with just the housing on and it was noisy , took the housing off and it was all good , put the other housing i had spare on with no piping all good , put the piping back on and the noise was back . So i won't be making the drift practice in a fortnight , rego next week then td06 etc may aswell go on and see if that fixes it! . Also tried to put some subframe bushes in but someone has over tightened the nuts that hold it up , with all the proper stuff i still managed to round the nut off so i gave up for the afternoon! . Another point of interest for me was , whilst it was on the hoist i noticed it had excessive movement in the right rear wheel , but im not looking into it until Friday 13 is over!.

Manuel Kasko Grand Master

Manuel Kasko

Posted
Posted

Yeah i still haven't worked out the image thing , you're quite welcome to explain lol

So you need to sign up for one of their accounts.

Only takes a few seconds.

Then once you log in and upload the image.

You have to use the "Direct Link" URL they have as an option.

Then come here and click on that little picture thing

Its just below the smile face when you are creating a post.

and paste the link in there.

Done :)

**unless you are on a phone and then ur f**ked

  • 2 weeks later...
  • 5 months later...
toffy Veteran

toffy

Posted
  • Author
Posted

It's been a little while since i updated this thread , mainly because of this:

post-20231-0-06900600-1357820764_thumb.jpg

State champ for 2012 yiew!!

Anyways , back onto skyline stuff . I have saved and bought a whole sh*t load of stuff to fit to this thing, list goes:

Td06sl2-20g 8cm kando (trust copy)

no name - ebay looking , high mount manifold (not sure i want to use this tbh)

Z32 afm

Power fc

gtr injectors

adj castor rods

rack spacers

oil cooler

r33 front lca's

adjustable upper control arms

2 way diff (pinched out of my cefiro)

R33 gearbox

rear pods for some rice

adj cam gears that i probably won't fit

some old skool guages (omori/greddy etc)

de-cat

gtr seats (which i might not use yet , i think my ceff would love them)

and a few panels and other bits and pieces.

I've finally been allowed to take holidays from work so it's time for me to do some work to it!!

so far i have fitted a new bonnet to it , rear bar and put most of the trim i pulled apart back together

pics:

post-20231-0-42074000-1357821837_thumb.jpg

post-20231-0-26105500-1357821844_thumb.jpg

post-20231-0-16647800-1357821850_thumb.jpg

post-20231-0-73985200-1357821853_thumb.jpg

toffy Veteran

toffy

Posted
  • Author
Posted

ready for rego now! , all i need is the $$ to pay for it , then it's game on for getting all the goodies fitted , fingers crossed it will be ready for the Feb 9 drift practice! (although i don't think i will quite have the time )

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...