Jump to content
SAU Community

Oil Restrictors And Crank Collars

KiwiRS4T
 Share

Recommended Posts

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Top quality CNC manufactured Oil restrictors for oil supply regulation in RB engines. Available as blank, 1.0mm, 1.2mm and 1.5mm.

SAU price AU$10 each P&P $5 to any street address in Australia or free postage with purchase of 2 or more.

Also Top quality brand new crankshaft collar for RB oil pump drives delivered complete with grub screws. These are made to the most exacting standards by CNC process to protect your OEM or aftermarket oil pump and have been proven by top engine builders with high powered street, drag, drift, circuit racing and jet boat motors (similar to Jun items). SAU price reduced because of changes in the exchange rate can now offer for AU$70. Free postage to any street address in Australia.

190312002.jpg

Link to comment
https://www.sau.com.au/forums/topic/401617-oil-restrictors-and-crank-collars/
Share on other sites
  • 9 months later...
  • 7 months later...
GTRPSI Mentor

GTRPSI

Posted
Posted (edited)

Put me down for 1X blank and 1 X 1.0mm restrictor sent to Melbourne.

Pm me some banking details.

Edited by GTRPSI
  • 4 months later...
millcomr33 Rookie

millcomr33

Posted
Posted

hi im new to this site .. but how do i order one ? but before i do that i want to know what do you rev your engine to with this collar on the crank ? and has it been tested properly yet ?can i slid it over the crank if i take the pully off ?

kind regards milton

  • 1 year later...
  • 2 months later...
KiwiRS4T Grand Master

KiwiRS4T

Posted
  • Author
Posted

What's the clearance between od of collar and id of oil pump gear?

Interested cause great price.

Cheers

No idea but dimensions are same as every other crank collar. Please PM any enquiries thanks.

  • 2 weeks later...
  • 5 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • Dose Pipe Sutututu
      Valve clearance for RB25det series 2

      By Dose Pipe Sutututu · Posted

      This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • GTSBoy
      Valve clearance for RB25det series 2

      By GTSBoy · Posted

      This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Kinkstaah
      Valve clearance for RB25det series 2

      By Kinkstaah · Posted

      Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...