Jump to content
SAU Community

Recommended Posts

Nismo solid shifter

nismo steel braided clutch hose

nismo Gt titanium gearknob

nismo panel filter

nismo front/side indicator's.. hate the look of the imitations

post-69990-0-53012400-1339481559_thumb.jpg post-69990-0-32370700-1339482345_thumb.jpg

only problem is how freaking cold the gearknob gets in winter :P had a nismo cluster too but dumbass auto elec dmgd it :/

yes that front badge is cheapo ebay replica. Does Nismo make front badges?

only negative thing i can say about nismo is the $1200 for rear tail-lights.. c'mon is it just me?

only negative thing i can say about nismo is the $1200 for rear tail-lights.. c'mon is it just me?

haha nope not just you, thats why I made my own copies..

IMAG0253.jpg

sorry to hijack :P

nismo parts in my car..

Nismo Rad Cap

Nismo clutch and brake lines (replaed by customs when going bigger rotor)

Nismo gearknob

Nismo GTR front bar

former nismo items,

nismo cluster

oil filler cap

suspension arms

haha nope not just you, thats why I made my own copies..

seen a thread on how to make those, looked all nice until it got to the part where he had to make some sort of silicon base or something, then i'm like damnit, don't know how to do that :/

This ?

genuine? where can i get?

my old GTT :wub:

just cosmetic stuff

genuine nismo rear bar, none of that Altia crap they flog off as 'nismo'

:whistling: lol if it wasn't fiberglass i would've gone for it. not a fan of fiberglass at all though, but this is nismo so i guess there's an exception.. looks nice :thumbsup:

Just remembered I had a Nismo leather shift knob on one of my previous 34's.

Was a lot friendlier than my old titanium Nismo knob, after the car had been out in the sun for a while. Also didnt show the fingerprints.

2453991850104230115s600.jpg

nismoknob.jpg

Edited by iwanta34gtr

seen a thread on how to make those, looked all nice until it got to the part where he had to make some sort of silicon base or something, then i'm like damnit, don't know how to do that :/

genuine? where can i get?

:whistling: lol if it wasn't fiberglass i would've gone for it. not a fan of fiberglass at all though, but this is nismo so i guess there's an exception.. looks nice :thumbsup:

no way this wasn't fibreglass, or were you referring to altia bars? genuine nismo are made from the same plastic as stock bumpers, came with the car when I bought it :cheers:

no way this wasn't fibreglass, or were you referring to altia bars? genuine nismo are made from the same plastic as stock bumpers, came with the car when I bought it :cheers:

It was definitely fiberglass. I've had two of these and still have one that I can't use on my car (wide guards).

So if anyone wants genuine nismo GT/T rear bar, its in the for sale section :)

Small knob.

33z7c6c.jpg

This is my one too :) good feeling ontop of my c's short.

It was definitely fiberglass. I've had two of these and still have one that I can't use on my car (wide guards).

So if anyone wants genuine nismo GT/T rear bar, its in the for sale section :)

wow ok never knew that hehe, like I said mine came with my car when I bought it as a fresh import, I was reading somewhere ages ago that these were plastic.

themoreyouknow.jpg

The altia ones are plastic.

All good :) I always hoped factory nismo gear was plastic for durability, but I guess not, some of their kits i've seen (350z and some other pieces) were also fiberglass. But then they also do a lot of their gear in plastic as well.

yeh altia is plastic, got it on mine. and as far as i know and with some confirmation with EZY34 the nismo 1's are definately fibreglass, but like i said, it's nismo so it's not exactly cheapo fiberglass that cracks easy and leaves a really shit finish when painted.

i think the gtr z-tune front bar is in some way fiberglass too (CRFP: caron fibre reinforced polymer)? some say the "polymer" refers to it being glass fibers.. is that wrong?

post-13786-0-45079600-1339504211_thumb.jpg

Understand it is genuine but wouldn't mind confirmation from some one on here.

Advertised as

Nissan Nismo Emblem Badge Nameplate Decal Rare JDM Tuning

  • Approx. (Width) 4.33" inches x (Height) .55" inches. Quick and easy installation!
  • Not a cheap Vinyl or Decal Emblem. Made with Special Aluminum Emblem and Embossed to create a 3 Dimensional surface.
  • Aircraft quality Aluminum. 100% Brand New
  • Hard Anodized in Color for a Long Lasting Finish. High Quality Emblem
  • Comes with 3M self-adhesive backing. Ready to stick on ANY flat surface

$9 ea ???

definately fake. + i would need something that screws on, it's gona sit on mesh. i've seen 1 thats exactly the same as that, probably from the same guy which screws on but yeh deinfately fake. wash your car enough and the red will start to discolour. they all say high quality but even the 1 i have on know is peeling abit..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...