Jump to content
SAU Community

Recommended Posts

  • 1 month later...

So how we going with making a second run? i just got me an OX bar rear bar so figure i need a daleo front bar sooner rather then later

Would be a third run actually. ;)

I've got a bunch of ends machined; I just need to buy some more tube. Any other takers?

Would be a third run actually. ;)

I've got a bunch of ends machined; I just need to buy some more tube. Any other takers?

If you need more takers to do a run, I suppose I can take one. No hurry though.

Edited by Commsman

If you need more takers to do a run, I suppose I can take one. No hurry though.

You got the rear one Leon, and I'd say the front one is a lot more noticeable than the rear. So far anyway, but haven't thrown it around some twisties yet.

Ok, I'll get on it shortly.

Ryan; I do; but I've had very little spare time recently. The next month should see things settling down, and I can focus on this.

You got the rear one Leon, and I'd say the front one is a lot more noticeable than the rear. So far anyway, but haven't thrown it around some twisties yet.

Picked up the rear one from Josh when I was in Brissy yesterday (thanks mate!). Not likely to install either of them till I sort some other stuff out, & really time poor atm.

Really only bought it 'cause of the GB. And I also suspect the front one will be doing the lions' share of the work.

  • 2 months later...

I've been Slacking off with this for a while now; I'll be kicking off again in the next couple of weeks.

If you'd like to have one; either shoot me a PM or reply in the thread.

Cheers, Dale.

I've been Slacking off with this for a while now; I'll be kicking off again in the next couple of weeks.

If you'd like to have one; either shoot me a PM or reply in the thread.

Cheers, Dale.

I do!! Haha I'm away in Europe till the 19th of Feb. But want one for sure as soon as im home

Yeah Dale, as per my post from October LAST YEAR, please count me in too, .....again :P

Can I have mine in Whiteline / Ox Motorsports silver? If not, please leave in unpainted (or undercoated etc) & I'll rattle can it myself.

Thanks maaaate.

Yeah Dale, as per my post from October LAST YEAR, please count me in too, .....again :P

Can I have mine in Whiteline / Ox Motorsports silver? If not, please leave in unpainted (or undercoated etc) & I'll rattle can it myself.

Thanks maaaate.

Lol, yeah; I looked at the date of my last post & thought I'd better get cracking again...

I'm on it.

Lol, yeah; I looked at the date of my last post & thought I'd better get cracking again...

I'm on it.

OH NO YOU DIDN'T!!!

Front reo first! :P

Apparently Theo will be finished my front Bar at the end of this month!

Edited by Jetwreck

Yeah Dale, as per my post from October LAST YEAR, please count me in too, .....again :P

Can I have mine in Whiteline / Ox Motorsports silver? If not, please leave in unpainted (or undercoated etc) & I'll rattle can it myself.

Thanks maaaate.

I do like the idea of Ox bar silver but yeah black is fine also.. Just want some stiffness!! haha that doesnt sound so good

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...