Jump to content
SAU Community

Recommended Posts

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

  • 4 months later...

i recently purchased the tarzan g box off jesse streeter, will be here early april hopefully. Il try write up some feedback after instalation

Dragging this up. By any chance have you fitted and tested the Tarzan G sensor as yet. Keen to hear of your personal experience.

Read all there is on the net. Mostly PR stuff. But stumbled across 1 good rave by a GTR owner.

The new ETS Pro appears to replace the Gsensor with a similar MEM ?

In 2 minds :wacko::wacko:

I've had a Tarzan box in my car since mid last year.

The car has a LOT more traction coming off the corner, where I had to feed in the power before I can now be very aggressive with the throttle and the car just tracks out of the corner like its on rails (I know, hackneyed cliché but that is the best way to describe it). There is maybe a small difference to braking performance but I can't say its huge. ATESSA definitely responds faster and in a more decisive way.

Highly recommended.

Thanks for real world experience.

Tarzan G arrives next week for me.

As I own a 93 GTR I have an expectation any improvement will be a little greater than I have now, maybe closer to the later model GTR's (33/34).

You'll see a big difference.

The big thing about the Tarzan Box and the other replacement G-Sensors out there, (Midori & Do-Luck) is that the pendulum in oil OEM sensor will have degraded over the life of the car and will certainly not be working correctly. So any replacement will make the AWD work properly because it most certainly won't be if you have the original sensor installed.

I Tested the Tarzan G Sensor out this morning. (Seat of the pants testing). No track and no times.

A definite improvement and worth while :yes: even for the normal to spirited driving that I do :yes:. Doing track work then I believe the benefits would be even greater.

(I suppose so would a cheap Torque controller set to 7 on the dial?)

Cabin torque dial actually moving under acceleration off the lights :) and up through the gears. You feel it and you see it - Win!

It's progressive and reflects what your doing - depressing accelerator and it's shifting power to the front.

- rather than heavy acceleration and 4WD coming on late (unsettling car). I used to do this just to see if the Attessa is working.

Tested it out on a corner I take every day turning right on the large roundabout and then halfway round a quick left to get off it.

Normally I fight the car on the left turn from spearing off to the right. Not today :D went exactly where I pointed her.

My GTR feels more sure footed off the mark and around corners, especially accelerating out the other side. There is no just on or off it's more progressive / linear.

It's definitely more responsive making it feel like it has more power/grunt under acceleration from the getgo. Attessa (4wd) is definitely on ALOT quicker.

I am impatient and waiting, even a second or two longer, gives me the shits. (hence -7's)

Experiences may be different but for me a big improvement.

Before I am asked - YES my OEM G Sensor works as it was designed too - This G works ALOT better.

That's where I started too. Couldn't decide as there was no local/SAU feedback on the ETS Pro.

I went and bought the Tarzan G for now. and I'm very happy.

Post up if you go the ETS Pro - I'd be keen to hear.

Just doing a price round up as I previously mentioned my attessa unit is busted and I need a new one:

Tarzan G Box - $ 648.65 - http://www.nengun.com/do-luck/tarzan-g-box

Midori Digital - $ 560.48 - http://www.nengun.com/midori-seibi/midori-spec-digital-g-sensor

ETS Pro - $599 - http://www.full-race.com/store/r14-awd-skyline/ets-pro-center-diff-torque-split-controller-for-r32-r33-r34-skyline-gt-r-1.html

Am I missing any? Haven't found any more info on Ruzic's G Sensor replacement. Is there any difference between these three?

These are all 100% OEM replacements?

Attessa is busted or G sensor broken?

PM me if you want to just replace your G with another OEM G.

---------------

The Midori and Do Luck unit still appear pretty much the same to me with different outer casings and likely "tuned" slightly differently. (even the external wiring is the same)

ETS Pro, although programmable and can be auto or manual (the other 2 aren't). It is not 'plug n play' and does not interface directly with the ABS.

Although from what I read can be spliced in. ETS pro appears the goods for very serious track drivers.

Hence I took the easy out and went PnP.

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...