Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...
  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

Quick question regarding mounting the digital sensors...

Do they need to be mounted in the exact centre of the car - or at least in the exact same spot as the original sensor?

Also curious about this.

anyone else had experiences with these units?

  • 2 months later...
  • 1 month later...
  • 4 months later...

You will have to do some research for current info

I understand both brands do a standard and a higher tweaked unit. (they are likely the same unit/technology if you see pictures of both side by side, maybe a different colour casing)

Also look at the capabilities of the ETS Pro? before rushing out and buying a unit.

Yep I'd hold off.

I bought the Midori one and - though it's been back to Midori for testing - found it to at least be reporting a fake signal to my V-Spec's digital G display.

Nissan G-Sensor:
http://youtu.be/Ct5od-3hSXA

Midori Spec Digital G Sensor
http://youtu.be/RHpTvkDVq8s

Although they aren't driven the same route - you can see that with the Midori unit in place the G display is shunted to the left whenever the vehicle is in motion.

I'd love some advice on this issue if anyone has any!

  • 1 month later...

What you see is how they work. I make the Skylab Fusion digital torque split controllers in the UK.

All these units so is tweek the voltage coming out of the G Sensor. Well, thats a simplified version.

What you see on the screen related directly to the voltage output from the G sensor. When the dot is in the middle, the G sensor is outputting 2.5 volts. 1.2G is 0.5 or 4.5v depending on direction. The usual ratio is linear. What my controller does , and all the others is alter the relationship between actual G and what the ATTESA sees.

This is why you cannot use them accurately with the R34 Display.

Just doing a price round up as I previously mentioned my attessa unit is busted and I need a new one:

Tarzan G Box - $ 648.65 - http://www.nengun.com/do-luck/tarzan-g-box

Midori Digital - $ 560.48 - http://www.nengun.com/midori-seibi/midori-spec-digital-g-sensor

ETS Pro - $599 - http://www.full-race.com/store/r14-awd-skyline/ets-pro-center-diff-torque-split-controller-for-r32-r33-r34-skyline-gt-r-1.html

Am I missing any? Haven't found any more info on Ruzic's G Sensor replacement. Is there any difference between these three?

These are all 100% OEM replacements?

Skylab Fusion $420

[url=http://www.gtr.co.uk/forum/175702-skylab-fusion-e-ts-controller.html[/url]

What you see is how they work. I make the Skylab Fusion digital torque split controllers in the UK.

All these units so is tweek the voltage coming out of the G Sensor. Well, thats a simplified version.

What you see on the screen related directly to the voltage output from the G sensor. When the dot is in the middle, the G sensor is outputting 2.5 volts. 1.2G is 0.5 or 4.5v depending on direction. The usual ratio is linear. What my controller does , and all the others is alter the relationship between actual G and what the ATTESA sees.

This is why you cannot use them accurately with the R34 Display.

Firstly - THANK YOU.

You've been the only person (including Midori Seibi) whose been able to answer my question!

So, to confirm, the jump to the left is purely a miscommunication between the G-Sensor and the MFD, caused by an increase in voltage by the Digital Sensor and not a fault.

If that's the case you've made this old man very happy and very relieved!

THANK YOU AGAIN!!!!!!

Firstly - THANK YOU.

You've been the only person (including Midori Seibi) whose been able to answer my question!

So, to confirm, the jump to the left is purely a miscommunication between the G-Sensor and the MFD, caused by an increase in voltage by the Digital Sensor and not a fault.

If that's the case you've made this old man very happy and very relieved!

THANK YOU AGAIN!!!!!!

Yes, there is no error, its just the way it works. What you have experienced with Midori Seibi is an unwillingness to be co-operate with the seller. They know exactly what their controllers do and what their short comings are. All controllers that work this way will have this effect. What you can do it leave the original G-Sensor wired just to the MFD. That way the G you see is accurate and the controller can still work.

  • 1 year later...

A quick update to this thread, I ended up getting a Do-Luck DTMII and blew it up trying to wire in the throttle cable :cheers:

Now I'm the market again for a g sensor. Is there any new products on the market? The Skylab looks interesting, anyone got one?

Is it PnP?

  • 2 weeks later...

Er huh?

Don't get it? I replaced my one with the Tarzan G-Sensor and the display is now working A-OK
No extra wiring needed...

Yes, there is no error, its just the way it works. What you have experienced with Midori Seibi is an unwillingness to be co-operate with the seller. They know exactly what their controllers do and what their short comings are. All controllers that work this way will have this effect. What you can do it leave the original G-Sensor wired just to the MFD. That way the G you see is accurate and the controller can still work.

Maybe it's an update but the new unit I have works fine with the display.

Out of interest, how did you wire it for it to fry itself?

A quick update to this thread, I ended up getting a Do-Luck DTMII and blew it up trying to wire in the throttle cable :cheers:

Now I'm the market again for a g sensor. Is there any new products on the market? The Skylab looks interesting, anyone got one?

Is it PnP?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...