Jump to content
SAU Community

Recommended Posts

hey,

Just new to this forum and skylines but id thought i share this with you all.

post-89062-0-05956800-1339387316_thumb.jpg

this was how my boot was with dual 12' solobarics but i quickly got over having no room, so i decided to make a layout from scratch,

post-89062-0-04164300-1339387579_thumb.jpg

so i stripped the whole boot down to nothing, then cut and screwed down just a 16mm mdf sheet

post-89062-0-69593500-1339387953_thumb.jpg

then i just built the amp into the box so it hides all them dirty wires and just a standard box into the other side and just screwed them to the floor, and theres a couple bits of 3mm play on top just to neaten it up and hide some gaps, then i put the back in last so i can still access the battery and its just held in with a couple of screws

post-89062-0-54981900-1339388631_thumb.jpg

post-89062-0-77945500-1339388707_thumb.jpg

then i just brought a copuple of rolls of carpet from autobahn and some spray adhesive and stuck it all together and thats the finished product,

post-89062-0-53528800-1339388805_thumb.jpg

post-89062-0-89407300-1339388890_thumb.jpg

post-89062-0-94184600-1339388915_thumb.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/402264-r33-custom-boot-install/
Share on other sites

  • 2 weeks later...

thanks guys, yeah still get to everything back wall has just a couple screws holding it in place and the floor can just pull up and i also moved the jack beside battery.

Very cool. I think ill attempt this as soon as i get some time off work.

  • 4 weeks later...

I did the same thing a couple of weeks ago and one thing that I found is that it's better to have the bottom foundation board in two pieces, so that it's easier to take apart when you need to get to the spare tyre.

Other than that, it's definitely worth spending an hour of your time to have something solid in the boot.

If you are planning to have a false floor in the middle, make sure you have enough off-cuts left over for spacers to put underneath the door.

The floor won't sit flat on the spare wheel, since the wheel itself doesn't sit totally flat in the well and also sits slightly lower than the top of the well.

  • 11 months later...

Part two of the boot, got a tad bored again and was sick of not being able to put my skateboards in that other boot so i knocked this one up at work. Just a simple flat layout with 4 screws holding the back plate in to get to the battery and a lid on a couple hinges so can access my battery and a bit more storage.

post-89062-0-81997100-1373782241_thumb.jpg

post-89062-0-46287500-1373782282_thumb.jpg

post-89062-0-97804500-1373782317_thumb.jpg

  • Like 1

New setup looks less practical than the old one, well executed though. p.s. that's not a skateboard lol

Dont judge haha thats not my proper board,

Mate first install looks great! I've got a fuel surge tank on the right hand side and wanted to make up a similar box to cover it aswell as sub box on opposite side. Would you have the measurements laying around still?

Nah sorry mate was just looking for my sketches, must have thrown them out sorry man.

Nice work man - admire the handy work.

But. As was said, your first attempt was probably the most practical - at least you can put some shopping bags in there etc.

Second one you would risk damaging the subs if you put anything in the back.

  • 1 month later...
  • 2 months later...

Yeah no problem getting the spare out, even though if i get a flat the spare tyre is pretty much pointless as my rims are much larger than that wheel barrow sized wheel.

That's awesome mate! I really wanna do the second install lol! Is there enough room to still remove the spair if needed?

Awesome work mate.

  • Like 1

Yeah no problem getting the spare out, even though if i get a flat the spare tyre is pretty much pointless as my rims are much larger than that wheel barrow sized wheel.

Yeah I had the same problem, had to put it on for a day and it looked crazy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinkstah, no, coilovers aren't illegal, especially as a bolt straight in. The illegal part will be if they're altering suspension geometry beyond factory limits, or the ride height is not legal.   Sounds like the blue slipper just didn't want to deal with any later possibility of mods appearing on the car.
    • The problem has always been that coilovers are able to be adjusted, almost at any time, to be too low. Most people who ever get/got defected for/with coilovers were actually afoul of the minimum ride height rule. So the interpretation by cops/inspectors was always that it is pointless to allow numpty to raise his coilovers and get the car inspected/cleared, then just drop them back down again as soon as they get around the corner from the inspection station.  This led to the interpretation that they were illegal unless rendered such that they can't be adjusted (ie, collars welded to the body, that sort of thing). That may or may not have ever actually been the official line, but I'm pretty sure it's not considered to be a solution these days. Coilovers themselves fall under clause 3.2 b of that manual, because they are an "installation of a variable ride height system" and they don't fit the exclusions in that clause (which point to air springs and other pneumatic adjusters). So, as per previous statements, they require engineering cert to be legal on the road. Once you have such cert, provided you do not adjust them outside the height range covered by the cert, you are OK. Without, you have an unroadworthy vehicle.
    • Here E10 is the cheapest fuel. And general advice is to not use it unless you hate your car. From what I remember it clogs up stuff in the fuel system or injectors?  With US/Canada being E10 across the board, does that mean that all fuel there is terrible?
    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW ) Edit: I checked. They aren't. https://www.nsw.gov.au/sites/default/files/2021-02/RMS-infosheet-light-vehicle-modifications-manual-suspension-and-ride-height.pdf
×
×
  • Create New...