Jump to content
SAU Community

Recommended Posts

hey,

Just new to this forum and skylines but id thought i share this with you all.

post-89062-0-05956800-1339387316_thumb.jpg

this was how my boot was with dual 12' solobarics but i quickly got over having no room, so i decided to make a layout from scratch,

post-89062-0-04164300-1339387579_thumb.jpg

so i stripped the whole boot down to nothing, then cut and screwed down just a 16mm mdf sheet

post-89062-0-69593500-1339387953_thumb.jpg

then i just built the amp into the box so it hides all them dirty wires and just a standard box into the other side and just screwed them to the floor, and theres a couple bits of 3mm play on top just to neaten it up and hide some gaps, then i put the back in last so i can still access the battery and its just held in with a couple of screws

post-89062-0-54981900-1339388631_thumb.jpg

post-89062-0-77945500-1339388707_thumb.jpg

then i just brought a copuple of rolls of carpet from autobahn and some spray adhesive and stuck it all together and thats the finished product,

post-89062-0-53528800-1339388805_thumb.jpg

post-89062-0-89407300-1339388890_thumb.jpg

post-89062-0-94184600-1339388915_thumb.jpg

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/402264-r33-custom-boot-install/
Share on other sites

  • 2 weeks later...

thanks guys, yeah still get to everything back wall has just a couple screws holding it in place and the floor can just pull up and i also moved the jack beside battery.

Very cool. I think ill attempt this as soon as i get some time off work.

  • 4 weeks later...

I did the same thing a couple of weeks ago and one thing that I found is that it's better to have the bottom foundation board in two pieces, so that it's easier to take apart when you need to get to the spare tyre.

Other than that, it's definitely worth spending an hour of your time to have something solid in the boot.

If you are planning to have a false floor in the middle, make sure you have enough off-cuts left over for spacers to put underneath the door.

The floor won't sit flat on the spare wheel, since the wheel itself doesn't sit totally flat in the well and also sits slightly lower than the top of the well.

  • 11 months later...

Part two of the boot, got a tad bored again and was sick of not being able to put my skateboards in that other boot so i knocked this one up at work. Just a simple flat layout with 4 screws holding the back plate in to get to the battery and a lid on a couple hinges so can access my battery and a bit more storage.

post-89062-0-81997100-1373782241_thumb.jpg

post-89062-0-46287500-1373782282_thumb.jpg

post-89062-0-97804500-1373782317_thumb.jpg

  • Like 1

New setup looks less practical than the old one, well executed though. p.s. that's not a skateboard lol

Dont judge haha thats not my proper board,

Mate first install looks great! I've got a fuel surge tank on the right hand side and wanted to make up a similar box to cover it aswell as sub box on opposite side. Would you have the measurements laying around still?

Nah sorry mate was just looking for my sketches, must have thrown them out sorry man.

Nice work man - admire the handy work.

But. As was said, your first attempt was probably the most practical - at least you can put some shopping bags in there etc.

Second one you would risk damaging the subs if you put anything in the back.

  • 1 month later...
  • 2 months later...

Yeah no problem getting the spare out, even though if i get a flat the spare tyre is pretty much pointless as my rims are much larger than that wheel barrow sized wheel.

That's awesome mate! I really wanna do the second install lol! Is there enough room to still remove the spair if needed?

Awesome work mate.

  • Like 1

Yeah no problem getting the spare out, even though if i get a flat the spare tyre is pretty much pointless as my rims are much larger than that wheel barrow sized wheel.

Yeah I had the same problem, had to put it on for a day and it looked crazy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...