Jump to content
SAU Community

Recommended Posts

Hi all,

I tried to go to the introduce yourself section of this forum but it comes up with an error msg. So seeing I joined to talk about & find out about Stagea's, I thought I would introduce myself here.

I once owned a 93 Skyline R33 sedan and loved it but it had some issues (bought it from a dodgy import dealer) so I got rid of it, then after the next non grey import and too much attention from the fuzz I got into four wheel driving to slow me down etc. So after a long time my love for fast cars has come back & now I'm a dad I needed something practical like the 4x4 but something to still enjoy and admire. Enter the Stagea....I just bought a low km series one auto Stagea RS4 AWD with Hicas :unsure: (Already looking at Hicas lock out bar)

So I have a few questions that I couldn't find exact answers too:

1. My Keyless entry doesn't work?, (I replaced the battery as I'm the first owner of this car in Australia)

2. Where can I get a workshop manual in English? (PDF format is fine)

3. Do these cars have a factory immobiliser?

4. Do Stagea's use OBDII diagnostics as I have a Scan Gauge II from my previous vehicle?

5. Where is the plug for the above?

Thanks for any help, it would be much appreciated.

post-95315-0-06524900-1339469895_thumb.jpg

Welcome, you will find answers to most of ur questions if u use the search function, just have to do a bit of reading. Just saying this cause ppl usually get flamed for asking question that hsve been answered a million times before, the answer to ur keyless entry should be in the stagea diy section

Welcome, you will find answers to most of ur questions if u use the search function, just have to do a bit of reading. Just saying this cause ppl usually get flamed for asking question that hsve been answered a million times before, the answer to ur keyless entry should be in the stagea diy section

I did do some searching but maybe not enough....thanks for the heads up!

Welcome, Nice stagea, The Stagea's always look the best with the dayz front bumper.

I like this body kit, the side skirts are a bit damaged though by the previous owner from Japan.

Hi

should be able to find workshop manual on ebay, no factory immobiliser.

I wouldnt put a hicas lockout bar on unless you get an aftermarket ecu as it will cause the stock ecu to think that your hicas is failing and may cause more ecu issues than its worth.. Thats the advice my mechanic gave me and he should know as he had a Stagea and did so with his...

Hi

should be able to find workshop manual on ebay, no factory immobiliser.

I wouldnt put a hicas lockout bar on unless you get an aftermarket ecu as it will cause the stock ecu to think that your hicas is failing and may cause more ecu issues than its worth.. Thats the advice my mechanic gave me and he should know as he had a Stagea and did so with his...

Thanks, I'll check out Ebay for the manual & thanks for the info on the lock out bar, but I already bought one.... Now I'll have to sort the ECU out, it never ends with modifying does it :rolleyes:

Just ordered the manual from ebay, thanks bjd. Where should I get a immobilizer fitted in the SE Brisbane area? I want to search the DIY section, but each time I get an error or it kicks me out back to the main forum page.... Moderators help needed!!!

A lot of info seems to have got lost/become inaccessible since the last revamp of the Website.

So far as I know the workshop manual has not yet been translated. There is an owner's handbook available. You can find R33 manuals online which take care of most of the mechanicals.

Does your central locking work? There is a tutorial on how to tune your key to the car but maybe the receiver is faulty.

The ecu is accessible via Nissan Consult not OBD - there are a number of aftermarket devices such as ecu talk

http://www.ecutalk.com/

that give you access mainly on a read only basis. The plug is behind the coin holder to the left of the fusebox.

HiCas delete should be the same as for the R33 so have a look in the skyline section (hopefully that is not broken too) and there are tutorials on getting rid of the hicas.

Thanks Kiwi,

I ordered a CD service manual off eBay today...

It's a shame all that info isn't accessible as its one of the reasons I joined this forum. Is it going to be fixed?? The Hicas lock out bar details have been explained to me. I will try searching the Skyline section for the other issues... Thanks again!

make sure you check the threads for the latest qld Stagea meet: confirmed for Sunday 24th June: would be good to have you along...

Thanks for the invite - I'll try and make it, but the day before the Stag is in the workshop getting coilovers, tie rods & Hicas lock out bar fitted. So hopefully it all goes to plan!?! Edited by Troppo

I'm in Brissy & have Nistune consult cable & software, I can come round & give you a hand if you like?

Thanks RB Bluey, if I can't get the central locking working I might take you up on that offer...

consult won't help with the central locking

it has probably had an aftermarket alarm/immobiliser installed at some point and they may have cut something

i'd be getting an adr compliant immobilizer fitted anyway as justcar won't insure you without one and most places give you a discount if you have one fitted

i'd be getting an adr compliant immobilizer fitted anyway as justcar won't insure you without one and most places give you a discount if you have one fitted

technically not correct, they will still insure you and take your money, but if it's not installed and you try to make a theft claim they will turn around and say no because it's one of our conditions that it is fitted. i really should get round to installing one in mine someday. :unsure:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...