Jump to content
SAU Community

Recommended Posts

HI,

I have a Damaged R32 GTR that I am wrecking. I was going to fix it but I found a shell and transpalnted bits and pieces.

No motor, box or harness, most other parts are availible.

I am Located in Sydney, I can post items at buyers expence.

Plese let me know if you are after a part not listed i will take pics and post.

Fuel setup was on and up and runing for less than 3000ks befor I lost it and heres whats left:

Under car custom surg tank, Tank fits on drivers side under car near back seat. It has 3x -6 and 2x -8 weld on bungs, was bolted to floor via Nut serts.

Dash fittings: all earls swivel except for speed flow one way valve

-6 2x straight, 1x 45deg,

-8 2x straight, 3x 90deg, 1x 180deg, 1x coupler, 4x hose clamp ends, 1x adapter to fit 044, SpeedFlow one way valve fits 044 and has -8 end

Earls Auto-flex hose lenths are a min of of -6 1m 1.1m and -8 31cm, 32cm 48cm, 72cm 1.2m 1.3m

1x 044 pump

1x Golan -8 fuel filter http://www.golanprod...om/filters.html for info.

6x 660 Rochester Injectors.

Get it all for $800 lot.

I have a passenger rear passenger quater pannel that I got to fix the car $200.

Front seats $400/pair. Drivers seat has some cuts/rips on it.

2x AFM and Apexi air pods $120

Doors (just the door itself and window/motor mechanism) $200 each

Stock R32 GTR twin turbos with manifolds heat shields - were perfect when i pulled them off the car but have been sitting around so i would suggest rebuild. $150

Rear Diff $350

Front Windscreen $150

Rear windscreen $150

Quarter windows $50 each

Best to just ask what your looking for and make an offer.

I will add to the post tomorrow

post-61876-0-33889300-1339837297_thumb.jpg

post-61876-0-57707800-1339837313_thumb.jpg

post-61876-0-54864600-1339837458_thumb.jpg

post-61876-0-30786700-1339837478_thumb.jpg

post-61876-0-16615900-1339837488_thumb.jpg

post-61876-0-95358900-1339837504_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/402696-wrecking-damaged-r32-gtr/
Share on other sites

  • Replies 91
  • Created
  • Last Reply

Top Posters In This Topic

Hi,

Rear quater - to repair car, I can take pics of drivers one on car now if anyone wants.

Front Seats - drivers is a little bit hows it going.

Door cards $50 each please look at pics,

Under dash trim with fuse cover - has a little glue residue on left side $30

If any one is interestid in the canon it was from a R33 GTR nice sound $100.

Spiro

0414 509 399

post-61876-0-45732600-1339898595_thumb.jpg

post-61876-0-94618800-1339898607_thumb.jpg

post-61876-0-19763800-1339898615_thumb.jpg

post-61876-0-19268200-1339898802_thumb.jpg

post-61876-0-92313600-1339898828_thumb.jpg

post-61876-0-15392500-1339898840_thumb.jpg

post-61876-0-30044600-1339898870_thumb.jpg

post-61876-0-17615000-1339898876_thumb.jpg

post-61876-0-99605000-1339898881_thumb.jpg

post-61876-0-43239800-1339898906_thumb.jpg

post-61876-0-46356800-1339898912_thumb.jpg

post-61876-0-70562200-1339898922_thumb.jpg

post-61876-0-64379300-1339899203_thumb.jpg

post-61876-0-20209800-1339899228_thumb.jpg

post-61876-0-49095000-1339899236_thumb.jpg

HI,

Sorry guys I’m 4 months into a 6month licence suspension and I work all around Sydney so I’m living with public transport ill try my best to get back to everyone but pics will probably be on saturday unless I get home early.

Hi,

I am willing to seperate the fules setup. Injectors $250, 044 $150, Braided lines and fittings - over 5m off lines and 10+ ends for $300.

also here are some more bits.

HKS Boost gauge. $30

Bonnet Lip $60

Brake Master $80

Clutch Master $80

Center Din Gauges $60

Dash Cluster $120

Side mirrors $50 each

Side Kick pannels $20 each

Rear Wing $70

Stering wheel, No horn $40. for all the ppl who asked i just found it.

Door Seals with ALL clips, little rip where window rubs on outer side inner guide side good. $35 Each.

post-61876-0-10681000-1340514224_thumb.jpg

post-61876-0-07539600-1340514307_thumb.jpg

post-61876-0-19967600-1340514356_thumb.jpg

post-61876-0-45121800-1340514494_thumb.jpg

post-61876-0-19613600-1340514541_thumb.jpg

post-61876-0-68590100-1340514573_thumb.jpg

post-61876-0-45117000-1340514669_thumb.jpg

post-61876-0-15272600-1340515191_thumb.jpg

post-61876-0-36178200-1340515274_thumb.jpg

post-61876-0-66278300-1340515369_thumb.jpg

post-61876-0-35052900-1340515965_thumb.jpg

post-61876-0-59643400-1340515966_thumb.jpg

post-61876-0-64578300-1340515967_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...