Jump to content
SAU Community

Recommended Posts

Hi Gurus,

Sorry if this has been covered, but I have searched the interwebs and cannot find any answers.

I did a service on my R33 Series 2 about 3000kms ago with K&N oil filter and Motul 5w40 full synthetic.

I checked the oil level on the dip stick this morning and the oil was already on the low level. There are no leaks that i can see on the engine itself or under the car and i park the car in 2 same locations everyday so it would be visible if it was leaking from under the car.

What could this mean ? or is it normal for skylines to drink oil ?

I understand that its normal for old cars to drink oil but my r33 has only 123,000kms and full service logs and has been stock its whole life.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/402890-drinking-oil/
Share on other sites

On an oil change I always fill so that it ends up sitting on the high (hot) mark AFTER the car has fully recirculated the oil.

This means you can then very easily see if the oil were to drop for any reason during service intervals. Mine never does but if the day comes when i do ill know straight away.

Rb's also seem to be a bit safer with a higher oil level, especially if you give them some revs n cornering...

Link to comment
https://www.sau.com.au/forums/topic/402890-drinking-oil/#findComment-6406612
Share on other sites

i would put 5 litres into it, not 4.3

bingo.

and just a random bit of trivia to make all us RB owners feel better about the amount of oil we need to feed our beasts. Particularly modified RB26's

- The Lamborghini Aventador needs 13 litres of what im sure is some pretty top of the line fully syn

Link to comment
https://www.sau.com.au/forums/topic/402890-drinking-oil/#findComment-6406717
Share on other sites

I just rechecked it this morning and the level seems to be at the same level as when i filled it up(hasn't dropped). I also checked the radiator for oil and it seams to be clear.

I must have checked on a very slight angle, i have read somewhere that on a skyline even the slightest angle makes a huge difference to the reading.

Thx for all the replies.

Link to comment
https://www.sau.com.au/forums/topic/402890-drinking-oil/#findComment-6407898
Share on other sites

sitting on the high (hot) mark

It's H for HIGH, not H for HOT.

If you replace the oil filter at the same time as you do an oil change, you need to put most of the oil in and run the engine for a few seconds before checking the oil level in the sump. Then add oil to bring the level up to the H mark.

Link to comment
https://www.sau.com.au/forums/topic/402890-drinking-oil/#findComment-6408183
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...