Jump to content
SAU Community

Recommended Posts

Hi Guys

So today i was working on my R33 S1 Auto RB25DET.

And i discovered that 3 wires had been eaten by the front passenger wheel.

I have only Recently purchased this Car about a week ago and its lived in my shed since, while i clean it up.

This had 3 Wires running to it (Blue,Yellow,Red) and runs under the passenger Guard.

It then Goes in to the engine bay and Lives under where the stock Airbox would be located (last owner put a HKS filter there)

Also Has SC-22 Skyline 3X1 printed on it (believe there is more written under the Wiring

Anyone Know what its called & its Purpose?

12060048.jpg

The Damage Found

12060050x.jpg

factory / jap alarm siren. i had the same one in my car in the same spot . hook it up to 12v and hear it squeal!

like so >>> http://www.skylinesaustralia.com/forums/topic/219971-what-is-this-thing-in-the-engine-bay/page__st__20

Edited by Munkyb0y

Thanks for the Help Guys.

I was thinking it looked something like a Speaker, and the Pictures prove it.

Atleast now it can Squeal if it wants to now, which my or may not be a Good things.

/Thread Close :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry, are coilovers ACTUALLY ILLEGAL in NSW? They aren't in Vic, as long as they retain 70% of stock travel and the car is above 100mm off the ground. Does NSW actually have a law making coilovers actually illegal? RWC/Blue Slip/Engineering people not knowing the actual f**king laws boils my blood. Demand them to point to the documentation that states a coilover is illegal. (it may exist in NSW )
    • But seriously, can we ask for the results of the "tip a bottle of metho into a nearly empty tank" experiment?
    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
×
×
  • Create New...