Jump to content
SAU Community

Stock Radiator Finally Blew.. Which Ebay Ones Are Recommended? Lol

GTEES

By GTEES,
in General Maintenance

 Share

Recommended Posts

GTEES Proficient

GTEES

Posted
Posted

as the title says, yes i blew my radiator tonight.

Just having a look at ebay for a aluminum one... there are so many and all at different prices.. all look dodgy to me. lol.

anyone bought one off ebay, and can recommend a radiator brand/seller?

for an r32 gtst.

thanks.

JadGTST33 Community Regular

JadGTST33

Posted
Posted

I was recommended ASI as well, but they didn't have mine in stock when I needed it (kinda urgent).

I ended up grabbing a random eBay job for $180 that I could pick up an pay cash for.

Had it for several months now and has been fine.

I did discover I had to change my thermostat too, but that was a separate issue (I'd now recommend doing radiator, hoses and thermostat all in one hit - works out much easier.)

Rekin Grand Master

Rekin

Posted
Posted

I have a 52mm ASI in my r32 gtst. It did not fit with the factory fan. (had to fit thermo fans in)

Go for the stock size ASI radiator or find a 52mm rad which will fit (if you want larger than stock)

StevenCJR31 Veteran

StevenCJR31

Posted
Posted

for ease of fitment it would be easier to go for a stock replacement style radiator, at least you will be able to refit your stock engine fan and shroud, doable for under $300 depending on brand

BuuBox Enthusiast

BuuBox

Posted
Posted

This might be alright: http://www.ebay.com.au/itm/Dual-core-aluminum-radiator-shroud-fan-skyline-R32-/290719928455

I had the same issue, but ended up getting new tanks put on the old radiator as the rest of it was in good condition and I didn't want to change the fan. Was relatively expensive at around the $140 mark.

Rekin Grand Master

Rekin

Posted
Posted

This might be alright: http://www.ebay.com....2-/290719928455

I had the same issue, but ended up getting new tanks put on the old radiator as the rest of it was in good condition and I didn't want to change the fan. Was relatively expensive at around the $140 mark.

I have my doubts that will fit. I got the 52mm ASI on my r32, had to buy the thinnest fans on the market for it to fit. Stock size and retain the clutch fan.

Flexalite_410_02.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Duncan
      Who has a Infiniti Q60, Q50 (V37)?

      By Duncan · Posted

      The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • MBS206
      Who has a Infiniti Q60, Q50 (V37)?

      By MBS206 · Posted

      Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...