Jump to content
SAU Community

Car Insurance Recommendations For My Axis Autech

ECR33_RB25DET
 Share

Recommended Posts

TWOAR81 Collaborator

TWOAR81

Posted
Posted

May have to write a nice letter to Office of Fair Trading as a $660 increase is hideous!

Do it, online quote listed as 1562.00 so guess what.... They can stick that up their a$$.

Will call tomorrow to confirm, but lumleys sounds like the go!

Nadnerb Explorer

Nadnerb

Posted
Posted

OP is from Melbourne, and i dont think NRMA insure VIC.

My friend has his 34 GTR insured for 50k with just cars. 1yr ago $1500pa, this year they tried to raise to $1900pa, but he got them to agree to $1600 p/a . I was so shocked when they quoted $2k p/a for $13000 agreed value on my stagea.

TWOAR81 Collaborator

TWOAR81

Posted
Posted

Hey all, got a bit of info off just cars... Basically Due to weather issues around aus over the last year re- insurance has gone up ( insurance providers for insurance companies) looks around 35- 50 percent.

Just cars, aami all owned by suncorp which took a big hit in the floods etc

Gonna get quotes of lumley spec vehicles anyone else gone with them?

Paramour Proficient

Paramour

Posted
Posted

Currently I have Shannon's at $1550 for agreed value $28k, hasn't changed in years.

Lumleys price was for $18k value which is about right, might have to switch as its a massive saving

Paramour Proficient

Paramour

Posted
Posted
What are they like with listing modifications?

Only mod is sway bars, $28k agreed value was a quote 4 years ago that never changed just kept sending out renewal, its a tough decision, do I save money now or make some if it's written off. .

will probably save money now. . still undecided. .

  • 4 years later...
Axi$ 350$ Apprentice

Axi$ 350$

Posted
Posted

WTF, is this for real, this old thread . What type of insurance cover would that have been for, or is that mate's rates.

The best Lumley's could do for me was this, Feb 2017

Autech 350s 6 sp

Original quote $ 2, 786. 00,

Amended quote, $ 2, 349. 20 (after a firm get the flying fu#k away from me). There was no third offer. Lol !!

Comprehensive cover,

Value $20,000, (I wanted replacement or $ 30,000 + )

$1000 excess,

No salvage rights.

That would mean in affect that if I had this cover at the quote I was given by Lumley's, first off I'd be feeling pretty riptoff n broke,

Secondly after just 5 YEARS they would have charged well over the odds in my view and well over half the purchase price of my staggie in the first place. Doesn't seem quite right to me. The ex recons I'm a tight arse,

Rego, green slip and insurance due in six weeks can anyone point me in a better direction than this over blown rip.

Paramour Proficient

Paramour

Posted
Posted
On 3/26/2017 at 11:41 PM, Axi$ 350$ said:

WTF, is this for real, this old thread . What type of insurance cover would that have been for, or is that mate's rates.

The best Lumley's could do for me was this, Feb 2017

 

NRMA are about $900'ish recently, Shannons similar amount, but thats rating 1, over 40 north shore.

Axi$ 350$ Apprentice

Axi$ 350$

Posted
Posted

Cheers paramour, I think we both noticed the nth shore part of that picture. I live in merrylands (car is garaged) which has been a very high crime area in the past, ( mostly bikie related, ie ice dealing and shootings ) ,so perhaps that would account for Lumley's outrageous quote. Yeah right!!! So we will try some of the others here in the next few days , see if the merrylands factor comes into play with them. Cheers mate ,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Turbodoc
      Noobie Stagea owner..

      By Turbodoc · Posted

      Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • GTSBoy
      Duncan's V37.......race car?

      By GTSBoy · Posted

      See if you can thermal epoxy a heatsink or two onto it?
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...