Jump to content
SAU Community

Recommended Posts

I have got a 32 but no longer have a licence to drive it. Car will be unregistered for 7 months until I get it back. I have only just purchased it with 120 on the clock.

I want to change the diff's (gts4), gearbox, engine oils and engine coolant before re-registering it. Am I better off waiting until just before I re-register to do all this, can I start now or is it not going to make much difference? The car will be started weekly with a possible sneaky lap around the block.

Link to comment
https://www.sau.com.au/forums/topic/405173-car-storage-7-months/
Share on other sites

just get a trickel charger for $30 at auto barn/repco mate, if you have good tyers, Over enflate them so they dont get flat spots,

Dont see a drive around the block doing much as it wouldent even give time for the brakes to heat up let alone anythign other,

turn the ignition for 10 min once a week and you should be fine,

Throw in a fresh batch of oil aswell before storing

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...