Jump to content
SAU Community

Recommended Posts

hey guys this one is for all the peps that know about the RB26DETT, i just bought a R34 GTR a few weeks ago and last night noticed a noise that started when i was in lower gears under power, i was able to record it thismorning and have uploaded it. Some friends think it is lifters. The oil needs to be changed so i have bought some lifter addative and injector addative also, if anyone can ID the cause of this would help alot or even give me a place to start.

The car drives fine also, hits all gear shifts comes on boost, it is allso factor stock besides suspension and exhaust.

Cheers

http://www.youtube.com/watch?v=BiqNhzqfGEM&feature=youtu.be

Link to comment
https://www.sau.com.au/forums/topic/405289-r34-gtr-engine-noise/
Share on other sites

  • Replies 90
  • Created
  • Last Reply

Top Posters In This Topic

Yeh i did, had nissan in tasie go over the car, they pulled off the turbos did a compression test, all came up good, the onlythings they found was diff pinion seal needed to be replaced and also weaping sump, oil pressure is fine and oil is full, it is rather black tho so this is y im gettihng it changed tomorrow and adding the lifter addative.

I don't think your lifter additive will do anything. Reason being, and more knowledgeable people will correct me if I'm wrong, but lifter treatment is traditionally for motors with hydraulic lifters that suffer build up of contaminants. The RB26 having solid lifters cannot suffer the same problem. The lifters can need re-shimming if out of spec, the hydraulic ones are self clearenced.

Does it rise and lower with Revs, or road speed?

Could be a number of bad things unfortunately.... hope its something more simple

if its done im going to have to sell it cheap and just by something for 10k and cut my losses i think, its my daily to and from work w/o a car i cant get to work.

That sux man, but now you know why they say, if you buy a gtr you better make sure you have enough money to buy another one (implying a engine rebuild)

i would have thought if it was a big end or blown engine that the noise would have been there the whole time and not just when i accelerate in 1st and 2nd, and over 3k rpm in 3rd the noise is gone alltogeather.

yeh 3 months and i would have the cash to rebuild it but getting to work is a real pig without a car.

Edited by T4NK

I remember writing this....

On your number one point, no its not hard. Just expect to reach deep into your pockets. If you can do work yourself, and do some research into it, Rather than just taking whatever is in a kit, then it works out much cheaper.

Remember, gtrs have their failings too. You might go get one, and spin a bearing in your first week. Hello 8k basic rebuild.

Cost for cost, once and engine rebuild is taken into account the V will not disgrace itself against a gtr in a straight line. It doesn't have the benefit of awd, but it is also more comfortable and easier to drive IMO. And you'll never end up with oil in the rockers in a vq!

Terrible luck mate....

Don't sell it though, to move a car like that in the time frame you need to get another car, you'll be looking at getting 20-30k if your lucky I would think..

Maybe diagnosis it, if bad, buy a crapper then save for the rebuild...

Fingers crossed mate...

Hey mate sorry to hear about the car. This is my biggest fear, im currently looking for a 34 gtr and would be in the same boat as you if I bought one and this happened. I keep reading peoples posts about this happening so often with their GTRs and it kinda got me thinking of just buying a 32 gtr, that way i would have enough money for a rebuild.

If you dont mind me asking where did you get the car from and how much did you pay?? You can PM me if you dont want to post it here. Cheers.

Hopefully you get some good news from the mechanic but with my limited knowledge this sounds pretty serious.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok cool, because I do have some OEM BMW options for light(er) wheels. 17x8.5 M Sport wheels are 11kg and I could put 255's on them. Maybe that's an initial test.
    • So, in the effort of pulling apart airboxes and testing enclosures to see if this aids in MAP loss at WOT I noticed: 1) The ducts up the OEM intercooler holes from the front bar help IAT drastically, whether the pod is shielded from the engine bay by an airbox missing a lid, or an airbox WITH a lid. Plus you get more induction sound without the lid. Having half the airbox (with no lid) acting as a barrier to the headers seems to help. 2) For shits and giggles I checked the TB. This was full pedal travel. This is actually full travel of the TB. Photos aren't perfect, but there was definitely an amount of play in it and it wasn't against the stop. After much swearing and adjusting the pedal, I realised that the cable is actually too long for the skyline pedal travel to fully articulate it. Having the pedal adjusted so WOT was actually hard open on WOT resulted in an idle of 3500rpm. As an aside, this was also the TPS registering at 3.1%. I removed the above to give the pedal enough travel to actually fully open the TB. I now get a satisfying 'thonk' on full open and full closed which you can hear pumping the pedal as it hits the TB stops (with the bonnet open and intake back on). Luckily for me, the screw screws into a raised metal boss under this plastic piece that is now acting as the new throttle stop. I've gained about 20mm (ish) of pedal travel and I can move it maybe a mm or two post open-thonk before it's hard against the stop. After all of this I did a bit of road tuning because a 102MM throttle is sensitive. The difference between holding an 950rpm idle and instantly stalling is about 0.4% of TPS movement. Will that help? I suppose it can't hurt. I set 'closed' point back to where it was, I can definitely feel the extra pedal travel that is needed to actually open the TB fully. But this morning I dropped the car off at Paint Jail again, so who knows when this will re-eventuate out to see if it helps with the top of the dyno hitting a ceiling.
    • Take heart that everyone else seems to have found a way. The OEM S1 indicators do slot in pretty firmly. It may simply be a case of having them sit slightly looser and nobody actually ever noticed this when attempting to remove a indicator from a JSAI bar :p
    • If the original NA ECU has a separate TCU then you are going to need to reroute wires that used to run between the trans and the TCU to the appropriate (1 to 1 equivalent) pins on the ECU. Other than that, it should work. Look up posts by @Kinkstaah on the subject.
    • So the stagea was a series 2 neo det with tiptronic auto. (I have the transmission aswell) and has integrated tcu in the ecu. I'm hoping to use the entire stagea ecu, engine and auto harness. 
×
×
  • Create New...