Jump to content
SAU Community

Recommended Posts

  • Replies 90
  • Created
  • Last Reply

Top Posters In This Topic

yeh it was really nice on Saturday night/Sunday morning, we left at around midnight did speed limits all the way to berowra was the 1st time i was able to drive the GTR on a good road other then to and from work so im pretty devastated about it. 1st time i gave it a bit and it went

After reading your thread and current situation, my suggestions for your car and it's use (big thing here is keeping constant oil pressure and oil around the oil pickup):

Stock gtr oil pump, because n1 will pump more oil out of sump regardless of restrictor.

tomei or similar baffle kit with restrictor, plus .5-1L overfill on oil. I put 6L in mine every oil change.

Mines style cam cover baffle kit.

It will live a happy life, but the stuff I reccomended is your choice in the end.

sigh i feel like i have died on the inside.

I am really out of my league with this sort of stuff and im lost, but i think what u said sean makes seance to me, im not going to be running huge boost or power so there is no point in doing the forged internals thats just a waste of cash on the parts and the machine work. If i was to do what you suggested would you happen to know all the parts i would need besides the Baffle pans, pump and bearings?

and is this the cam baffle u where talking about?

http://www.nengun.com/mines/triple-flow-cam-cover-baffle-plate

Edited by T4NK

ok so my list is

Engine======

Bearings

Gasket set

Timing belt (may as well do it with engine out)

Water pump (may as well do it with engine out)

oil delivery====

Sump Baffle

Cam Baffle

Oil Restrictor

Oil pump

hmm well this is a very steep learning curb for me, other option is to fix what is broke and sell her, as sad as i will be

As above, at least get some new genuine rings for the pistons as well.

Shouldn't cost too much.

Also get new timing belt tensioner bearings (because the wear and dry out) and a new tensioner stud, as studs are known to break.

And make sure everything gets cleaned out really well. Ball bearing turbos hate any sort of metal debris in them...

Shop around/ check for sale threads for best deals too.

Ps. Why on earth would you make your GTR a daily, thats just asking for trouble lol !

would have to agree with this 100%.. its not impossible, but far better if you dont have to rely on a car like this as your primary mode of transport unfortunately..

keep us posted, best of luck to you mate..

Mine is a daily i dont see a problem with it being a daily

Everyone's worst nightmare man. Tuff luck. Get it back on the road and enjoy it.

I know u want it as a daily but it's a risky thing man.

I had mine as a daily for a bit and hated putting so many kms on it. The bug will bite mate it's just a matter of time.

I ended up buying a pos daily for $500 to get to work and back. I absolutely love being able to leave my baby in my garage for weekend ls etc. prob the best thing I ever did was buy the daily.

Yeh im waiting on a price to do the oil system and clean the block out and replace bearings, i think this is the best option for me, im also seeing if i can borrow a car from my parents for a few months, if only this happend in 3 months time i would have been ok but 2 weeks after i bought the car, i also think the guy i got it from knew it was shagged as he has not returned any txts or calls and i still have his peronalised numberplates that he wanted me to send back.

Feel your pain, i will be pretty pissed. If this happens to me. luckily mine is weekender only, although do get driven on the odd spirited drive. let us know what you end up doing and how much a standard build cost. everyone talk about big forged builds, but not everyone needs that kind of engine if your keeping it stockish.

Im going to to a forged build but i think im going to use the same size pistons to try to cut down labour on it, im going to have to garrage it for 2-3 months b4 i can do it and ill pay cash for it. I need this thing to be bullet proof, not for big power but for reliablity as i want to use it as a daily. im doing around 120km a day atm but i will be moving closer to my work in the next 6 months so this will cut right down, i just want to enjoy the car and not have to worry about blowing it out again so doing it right the 1st time. Im looking at getting power tune or the shop on the coast to do it at this point depends who can give me the best price and service.

Im going to to a forged build but i think im going to use the same size pistons to try to cut down labour on it, im going to have to garrage it for 2-3 months b4 i can do it and ill pay cash for it. I need this thing to be bullet proof, not for big power but for reliablity as i want to use it as a daily. im doing around 120km a day atm but i will be moving closer to my work in the next 6 months so this will cut right down, i just want to enjoy the car and not have to worry about blowing it out again so doing it right the 1st time. Im looking at getting power tune or the shop on the coast to do it at this point depends who can give me the best price and service.

I was in the same situation of wanting to rebuild it for strength and longevity and only use the stock Nissan parts.

But Racepace explained and justified to me how they rebuild their RB26's and forging is the best.

As well as forging, refinement / customisation / balancing the parts and improving the whole engines setup.

Which leads to Strength / Longevity / With-stand High Power Applications = Bullet proof.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...