Jump to content
SAU Community

Hks Fuel Rail Fitting

Hanaldo

By Hanaldo,
in Engines & Forced Induction

 Share

Recommended Posts

Hanaldo Grand Master

Hanaldo

Posted
Posted

Hey all,

I posted this topic awhile back in the cosmetic section, no idea why lol, it made sense at the time.

Anyway, I stupidly rounded the internal wrenching plug that blocks the middle return hole on my HKS fuel rail, I just wanted to know if anyone knows what size and thread that plug is so I can replace it? Is it an NPT plug or?

Cheers for any help,

Martin.

Link to comment
https://www.sau.com.au/forums/topic/405342-hks-fuel-rail-fitting/
Share on other sites
34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

Can you just take the plug to pirtek or something?

Its just a blanking plug to block the middle port on the fuel rail right or have I misunderstood?

Yeah its the blanking plug he is referring too.... Have you pulled it out yet Martin? Or trying to get a replacement before you do?

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

Can you just take the plug to pirtek or something?

Its just a blanking plug to block the middle port on the fuel rail right or have I misunderstood?

That's the one.

If no one knows exactly what the fitting is then I will attempt to get it out and take it in. It's just that the liquid transfer solutions stores aren't really near me, it's a good 100km round trip to get to any of them. I will be going to Enzed tomorrow to pick up some braided hose and fittings, so thought if someone can tell me what it is then it saves me a trip.

Yeah its the blanking plug he is referring too.... Have you pulled it out yet Martin? Or trying to get a replacement before you do?

I haven't got it out yet because I still haven't found a 6.5mm allen key. It's also impossible to get a full size allen key on it properly with the Plazmaman plenum on. The head is coming off this weekend, so will get it out when everything else is off.

34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

Sweet, let me know how you go with the head removal etc..... IF there is a place on the east coast that has parts etc i am always happy to grab it and post it etc if it helps mate :thumbsup:

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

It leaks. When I originally put it in, I only put it in finger tight and without any thread sealant on it (doesn't have an o-ring) as I was just using it to block the hole while everything was apart, had been planning on taking it out again later. Then of course in my excitement when everything was back together, I forgot about it.

For some reason, it was then impossibly tight and I rounded it thinking it must be about to crack loose. It seems to have stopped leaking, but I can't exactly see it while I'm driving and the fuel pressure goes up. I have this thing about fire in my engine bay, so I'd rather get it out, replace it, and put it back in properly.

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

better off welding it up then, a fire extinguisher onboard is a good idea. :yes:

Have one :) The plan is to go dual entry in the future so I don't want to weld it. Wouldn't really want to weld it anyway, means getting it anodized again. Not too big a deal but I'm aiming for as quick a turn-around as possible this time, really want the car back on the road.

  • Like 1
34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

The actual plug sits recessed into the rail so i am not sure if the o ring would seal it due to the shape of those plugs, however that is on the right track :yes:

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted (edited)

Yes, it's similar to that, but internal design, like this:

140.jpg

However I'm not sure on the size or thread. -10 would be way too big, that wouldn't even fit on the rail lol. I suspect it might be -6 as the end fittings were both -6, but then someone told me it isn't an AN or NPT fitting :/

Edited by Hanaldo
34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

Have you searched for someone selling a rail on the forums? See if they can get pics and measurements to help you out? They are loose in the pack when new so it wouldnt be a big hassle for them really?

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

Have you searched for someone selling a rail on the forums? See if they can get pics and measurements to help you out? They are loose in the pack when new so it wouldnt be a big hassle for them really?

Yehhh I could do, I was just hoping someone had needed to replace one before and remembered exactly what they bought, that way I could be sure it would be correct. Really the best way would just be to pull it out and take it with me, it's just so far to drive :(

kitto Mentor

kitto

Posted
Posted

Can you upload a photo of it?

It wont be an AN thread, it'll be either NPT or O ring port.

Most after market fuel rails have O ring ports threaded into them, then you just simply thread in an O ring port to AN size of your choice adapter.

Hanaldo Grand Master

Hanaldo

Posted
  • Author
Posted

Can you upload a photo of it?

It wont be an AN thread, it'll be either NPT or O ring port.

Most after market fuel rails have O ring ports threaded into them, then you just simply thread in an O ring port to AN size of your choice adapter.

I can take a photo of it in the rail? Lol. Looking through the Earls and Speedflow catalogs, there is NPT, AN and Metric threads for these plugs. Just going by the pictures, it looks like it's an NPT plug, it doesn't have an o-ring and the metric plugs aren't internal. So I guess as long as HKS are following what seems to be international standard, then it should be an NPT plug...

what about getting a mobile hydraulics guy to come out?

what about autobarn, would they have any of those rails on the shelf?

Well mine is a genuine HKS, I doubt they have any stock of those. In any case, I believe Autobarn no longer exist in WA, we only have Auto1 here :/ Mobile hydraulics guy is probably a bit too lazy for me haha, if no-one on here knows what the fitting is then I'll just wait until I can get it out and then make the trip again, no big deal.

kitto Mentor

kitto

Posted
Posted

http://www.hks-power.co.jp/usa/images/Pid=1163.html

Judging by the picture, i'm going to say its either a metric or NPT plug. I would say metric though. Probably M14x1.5

Really hard to see though.

Note, that is not an RB fuel rail. But HKS would have made them all very similar.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Starter motor replacment teeth count.

      By Dose Pipe Sutututu · Posted

      Just a thought, was that car and auto at any point of its life? If so, maybe whoever bridged the inhibitor switch/circuit did a not so good job.
    • Dose Pipe Sutututu
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Dose Pipe Sutututu · Posted

      Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • Kinkstaah
      Strange issue RB25DET wont start

      By Kinkstaah · Posted

      I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • Kinkstaah
      First time Skyline owner

      By Kinkstaah · Posted

      The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • Kinkstaah
      Chris' Toyota Mark ii JZX110

      By Kinkstaah · Posted

      I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
×
×
  • Create New...