Jump to content
SAU Community

Recommended Posts

Hi guy - got a question about my other car ...

I bought a 2005 Mazda sp23 from a car dealer a week and a half ago. Went for a test drive and was all good except a slight ticking sound from the engine. Dealer said its been sitting there for 2 weeks so it might be lifters etc (I now know that the sp23 doesnt even have lifters).

Anyway long story short, the sound got really bad once the engine was completely warmed up, so I called the dealer who asked me to take it to "his" mechanic shop. At the shop, they straight away said its the bottom end and advised me to leave the car there and talk to the dealer.

Now his mechanic said its the big end bearing and he'll fix it in a day or two ... my question is, the bearing is a pretty big fault and unless he machines the crank etc and does everything properly (which he won't since he's doing this in 2 days) - it'll be a bandaid fix at best.

What are my chances of getting my money back from the dealer? On page 14, it says I should be able to?

http://www.accc.gov.au/content/item.phtml?itemId=963175&nodeId=cbe0411ccf8d0b8fbf2bdbacea75046f&fn=Consumer%20guarantees%20a%20guide%20for%20consumers.pdf

Thanks for your help in advance! :(

Link to comment
https://www.sau.com.au/forums/topic/405478-statuatory-warranty-question/
Share on other sites

it's less than 10 yo car and you are within the cooling off period.

technically you can get your money back.

No dealer is going to want to however....

Considering it the engine thrashed..I would be hitting him up for it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Started sifting thru my brakes to decide which ones I will run on Clem   Made me think I should just put them all on Silver...for when brake fade just isn't an option   Should be able to bump rotor up from 343x32 to 348x36 off Supra. Not sure if the Supra annulus is right for the Alcons or APs but trying g to find a used Supra\M4 rotor to test fit The Alcons seem to gain 1-2mm clearance which all helps  
    • So car is getting a few mods to the cage and some jacking points welded in Meantime Ol Silver gets a new gearbox and shiny clutch.  Old Box is being set aside for Clem  
    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
×
×
  • Create New...