Jump to content
SAU Community

Recommended Posts

Hi Guys,

I've got the following parts for sale. PM or call me. 0421 973 558. Pick up referred.

HKS Type S front mount turn flow intercooler kit.

As arrived from Japan. Condition is not 100%, some fin damage and end tank repaired, but looks to be ok. Comes with all piping, brackets, bolts, hose clamps, HKS silicone joiners, fitting instructions, etc.

Doesn't have the pressure drop and flow restrictions of the kits with the return pipe under the intercooler. Haven't fitted it to the wife's 34 sedan, as we are selling it.

$250

IMG_1629.jpg

IMG_1630.jpg

IMG_1632.jpg

Unknown Jap stainless long split front pipe.

As arrived from Japan. Good condition, minor scrape on bottom. Has had an o2 bung welded into it. Has bracket to mount to gearbox. 3" flanges, splits into 2 2.5" pipes and merges back into 3" pipe. Beautifully made. Great for getting low and staying legal.

$150

IMG_1634.jpg

IMG_1635.jpg

Stainless split dump pipe. Good condition. SOLD

High flow 2.5" cat. Great condition, no blockages. Upgraded to 3" cat. $50

IMG_1609.jpg

IMG_1610.jpg

Stainless Steel door plates to suit R34 4 door.

Fantastic condition. Will be a shame not to fit them to the car. Selling for a lot less than I paid to get them here from Japan. Black mark on front door plate rubs off. $250

Skyline007.jpg

Skyline008.jpg

R34 Instrument panel dress up panel.

Carbon fibre overlay with chrome gauge rings.Excellent condition. Very nicely made. As arrived from Japan. $200

Skyline003.jpg

URAS R34 4 door roof spoiler.

Brand new, as arrived from Japan. Not painted, but in black gelcoat. Perfect fit. SOLD

Factory R34 4 door rear lip

Genuine series 2 rear boot lip. Has clear LED brake light. The rear lip was damaged in transit from Japan but is repairable. SOLD

R34 Series 2 front bar

Fantastic condition. Complete with grill, badge and clear indicators. As arrived from Japan. I only unwrapped it tonight to take pics! $250

Skyline012.jpg

Skyline013.jpg

Skyline014-1.jpg

4 door weather sheilds

Excellent condition. Didn't even make it onto the car. Hard to find in good condition. $200.

Skyline010.jpg

Skyline009.jpg

R34 4 door window switches

Good condition. Series 2 so it has a Joystick for mirrors. $80

Skyline011.jpg

R32 GTR front lip

Reasonable condition. small crack in plastic near mounting tab. Will need paint. SOLD

More parts and pics listed below as the forum wont let me upload so many pics in 1 post.

Cheers

Scott

Edited by SABBAi

Hey mate... How much for the bar and does it come with the reo? Also you dont have a dump pipe at all do you? Like what comes with the 4 door exhaust, is it just cat back? And how much for scuff plates? Could I get pics of bar and plates to [email protected]?

Hi Chris,

I'll get some pics and prices up tomorrow for you. The front bar doesn't have the reo, it's just the skin, it does have the indicators and grill however. The 4 door exhaust is a cat back. I do have a split dump also.

pics tomorrow.

Yah cool, im gonna get the justjap full dump pipe but just though i'd check... you dont have the cold air intake part of the air box do you? the part going from rad support to air box?

Hey Chris, the front pipe is 304 stainless. The flanges and bracket is 314. I don't have the snorkel for the air box sorry.

R34 4 door Apexi exhaust

So I thought I bought a Fujitsubo exhaust. I hadn't unwrapped it sinse it got here from Japan. It is in excellent condition. Not a blemish. Pity it's not going on the car. I looked at what I paid for it and blushed a little. My loss, your gain. $500

Picture585.jpg

Picture586.jpg

Picture587.jpg

URAS / Monkey Magic Series 2 front lip

Brand new. Still sealed in it's bag. Great looking lip. Not sure if it'll fit an S1, but if you're local you're welcome to try.

SOLD

More parts to be added as I find them in the garage.

Hey mate, what size is the $50 split dump pipe? Would is suit a 3" exhaust? Also I have the exact same exhaust that you are selling, for anyone interested it is a top quality exhaust, it's not overly loud and definitely not droning which i like.

Hey Chris, the dump pipe will fit a 3" exhaust. I was going to run it with the split front pipe, high flow cat the Apexi exhaust.

As for R34 bars, I have the Series 2 front bar which is second hand.

Hey dude,

in ragards to the factory boot lip... do you happen to know if it covers up the factory brake light?

-Aerron

Hey Mate, yes it does. To fit the lip, you remove the factory brake light. The brake light in the lip has a loom that plugs into the brake light plug and seals the hole.

Same as the pic of the white car above. I do have the same bar as you have, but I was going to swap it for the S2 bar. Want me to bring it tomorrow night so you can see how it fits? Also, you interested in the BBS rims?

PM's have been replied to.



  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...