Jump to content
SAU Community

Recommended Posts

Quite easily, setting your suspension up all stiff can work great on the track but can cause a car to duck,dip and dive all over a bumpy back road and quite easily throw you off the road..

That's why you buy decent suspension and not $1000 cheap rubbish stuff... So that it doesn't do that :)

End of the day as i said, a 240rwkw well setup car will be faster in every scenario (other than 1/4 mile drag endeavours) than a 300rwkw floating boat with stock everything else.

Sure John is mighty quick with his setup and 220kws but it has taken him 3 years and 3 cars to get to where he is. I also dont think you will hear him complain about the extra 40kws he now has on e85

And what does that tell you? :)

Given it's pretty much what i said on page one, just a shorter version (handling/learning to drive first - then power - works out cheaper in the long run).

You won't find the limit, if you don't go past it and that's one's own choice irrespective of power.

If you have more, you'll just want to go faster and push in the same instance (someone that pushes, will always do it), so it's not particularly really relevant.

full service and all fluids changed at a minimum (gearbox, diff, P/S etc)

radiator

clutch

diff

tyres

brakes

suspension

no point having 300rwkw if you cant;

1. turn corners with that power

2. stop the car with that power

IMO you really are going about it the wrong way. Handling and learning how to drive comes first, then comes the power. Things like a decent diff and suspension setup make so much difference it's hard to gauge "just how much" because it's more than just a number on a piece of paper.

And all the stock shit is realistically rubbish stock... so add another 140rwkw or so, just asking for trouble.

getting a stronger clutch and flywheel,

may need stronger coil packs and spark plugs aswell ?

gone over my budget but have to do whats needed so the engine doesnt fail

getting a stronger clutch and flywheel,

may need stronger coil packs and spark plugs aswell ?

gone over my budget but have to do whats needed so the engine doesnt fail

You might need coil packs, you won't know till you "get there" type thing. They might be ok, might not.

Plus, just normal coppers are more than fine

Ohk I got nkg iridiums . Mechanic said if they are 11m they might need to be shorter. Dont understand

Yeh you're gonna need a 0.8mm plug gap, possibly 0.6mm depending on how good your coilpacks are. The NGK Iridiums were a waste if they are 1.1mm, they can't be regapped.

Yeh you're gonna need a 0.8mm plug gap, possibly 0.6mm depending on how good your coilpacks are. The NGK Iridiums were a waste if they are 1.1mm, they can't be regapped.

Haha yea that would be right ..

Is it to suit the bigger injectors or something

Haha yea that would be right ..

Is it to suit the bigger injectors or something

Nah, to suit the boost really. At the power level you're aiming for, OEM-style coilpacks will struggle to give a strong enough spark for a 1.1mm gap; the spark is likely to blow out resulting in misfires. So you reduce the gap to avoid misfiring.

As Ash said, coppers would be more than ok, you can regap them, and they will only cost you around $20 for a set of 6.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...