Jump to content
SAU Community

Recommended Posts

So you want something that doesn't nose over @ 450rwkw++.

Looking at 25psi+, and all in by 5000rpm on a 2.6ltr?

Whilst still having a mid?

So your saying anything other than a gtx35 is over kill ? What a.r would you have to get 450 on 35gtx

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

What I'm saying is - What do you actually want - exactly?

Your posts conflict in terms of what you want, and what you are going to get.

I'm also assuming you aren't spending any more money on the motor so a sensible 8000-8200rpm limit given the basic build?

What i want exactly? A street monster GT-R with atleast 450awkw.. The laggiest i'd want it to be is full boost at 5000rpm depending on what turbo i end up with. I wont be touching the engine currently but i do intend on putting a 9L sump and a nitto oil pump sometime down the track. The car rev's to 8000rpm with relative ease, the absolute limit for me is 8500rpm with a N1 oil pump.. ive never taken it too 8500rpm during my ownership but with a big single i possibly might do it.

When i say at least 450awkw this is what i mean, if i get that figure with bucket loads of torque id prefer have that set-up rather than having 500awkw with less torque. For example I currently get full boost at 4500rpm with -5's so 500rpm of more lag wouldn't bother me if im going to make alot more power and torque while the car is on boost. And im absolutely am not afraid of high boost i cannot wait for it to be quiet honest. I hope i have been as clear as possible..

-I will be using E85

-I want 450awkw or more with E85 = Pushing the turbo's limit's

-If i only manage to get 450awkw with E85 but bucket loads of torque i'll be very pleased.

-Because the current setup can push 400awkw i do want alot more gains with a single turbo.

Edited by Sedat

stroker or 3L bottom end if i was going to spend that sort of money, Should really help with the before 5k issue aswell?

Surely you could push 450kw out of your -5s, come on song a bit earlier, save a fair chunk of money aswell

though if your heart is set on only what you want, Then id be taking 20 grand into one of the best workshops/tuners i could find and tell them exactally what youve said here. Job Done!!

Edited by sydking

When i say at least 450awkw this is what i mean, if i get that figure with bucket loads of torque id prefer have that set-up rather than having 500awkw with less torque. For example I currently get full boost at 4500rpm with -5's so 500rpm of more lag wouldn't bother me if im going to make alot more power and torque while the car is on boost. And im absolutely am not afraid of high boost i cannot wait for it to be quiet honest. I hope i have been as clear as possible..

-I will be using E85

-I want 450awkw or more with E85 = Pushing the turbo's limit's

-If i only manage to get 450awkw with E85 but bucket loads of torque i'll be very pleased.

-Because the current setup can push 400awkw i do want alot more gains with a single turbo.

Well for 1, your -5s are laggier than they should be... They will also put down more than 400 at the tyres if the setup is done correctly. Quite a few are 420-440 (which isn't far off your 450)

Anyway that aside, single - GTX35 is still a good choice from the results coming in. People are making near on 400rwkw with a GT35 - add the GTX in, bit more boost, bobs your uncle really.

If it only makes 440rwkw, just get the place to play with the figure to make you happy :D

If it only makes 440rwkw, just get the place to play with the figure to make you happy :D

I sometimes wish he would, unfortunately Cihan doesn't want to be known as the happy dyno joint.

A gtx35 isnt going to get you over the 450kw mark in awd on that dyno, perhaps you should look at the GT37 if the number is that important?

Well for 1, your -5s are laggier than they should be... They will also put down more than 400 at the tyres if the setup is done correctly. Quite a few are 420-440 (which isn't far off your 450)

Anyway that aside, single - GTX35 is still a good choice from the results coming in. People are making near on 400rwkw with a GT35 - add the GTX in, bit more boost, bobs your uncle really.

If it only makes 440rwkw, just get the place to play with the figure to make you happy :D

My car isnt currently tuned therefore i assume it is more laggier than what it should be. I believe that my setup has been put together pretty well, although i dont go on boost very often because of the car being out of tune. I think i might max out the TT set up first and then go for a single.

I sometimes wish he would, unfortunately Cihan doesn't want to be known as the happy dyno joint.

A gtx35 isnt going to get you over the 450kw mark in awd on that dyno, perhaps you should look at the GT37 if the number is that important?

I just put that number as a ball mark, but yeah ive seen Cihan in action his very switched on. Do you ever take your car to Edge? I think ive seen it there you gave it abit of a squeeze as you left lol.

I sometimes wish he would, unfortunately Cihan doesn't want to be known as the happy dyno joint.

A gtx35 isnt going to get you over the 450kw mark in awd on that dyno, perhaps you should look at the GT37 if the number is that important?

lol my point was more than splitting hairs over 10rwkw doesn't mean much @ 440rwkw when you put a 5% variance on it for different dynos for instance :)

Plus a GTR isn't AWD... Dunno how many times I've said it. It's not a 50/50 split so the power loss is nothing like an EVO or WRX.

My car isnt currently tuned therefore i assume it is more laggier than what it should be. I believe that my setup has been put together pretty well, although i dont go on boost very often because of the car being out of tune. I think i might max out the TT set up first and then go for a single.

That would be a good start I think.

If you aren't happy - then look at dumping a whole wad of cash... But bear in mind you will be spending quite a major amount for say, 20-30rwkw extra.

Hence being fixated on a number can be your own worst enemy

Get your e85 setup done first and sort the fuel side of things and go for a proper tune on your -5's you will be quiet suprised at the results.

As nismoid said I cant justify spending that much money for a whole new turbo + single turbo manifold + gate to change to something that will net you an extra 40kw at most. If I was in your shoes and going for a big single when Im already sitting at the low 400kw mark I would shoot for 500+ and dont expect blistering quick response, otherwise the twins will keep you more than happy.

Also what clutch and box are you running? Budget for this as well, especially the gearbox as OEM item's arent generally happy getting smashed at 8000rpm when your motor is making more than twice the power it came out of factory.

Edited by nomnomv8

My car isnt currently tuned therefore i assume it is more laggier than what it should be. I believe that my setup has been put together pretty well, although i dont go on boost very often because of the car being out of tune. I think i might max out the TT set up first and then go for a single.

I just put that number as a ball mark, but yeah ive seen Cihan in action his very switched on. Do you ever take your car to Edge? I think ive seen it there you gave it abit of a squeeze as you left lol.

how long have you ahve the -5s on and whats makes you want to change when you ahvent even had them tuned?

E85, Solid internals that you have, -5's on 25+psi should net you well into the 400+ kw range.

seeing as you have everything set up, get a tune done then see its real potiential before going the other route.

I just put that number as a ball mark, but yeah ive seen Cihan in action his very switched on. Do you ever take your car to Edge? I think ive seen it there you gave it abit of a squeeze as you left lol.

He has tuned a few M35's, mine is the only white one though. I'm there every second weekend as I can't stop fiddling with my setup.

lol my point was more than splitting hairs over 10rwkw doesn't mean much @ 440rwkw when you put a 5% variance on it for different dynos for instance :)

Plus a GTR isn't AWD... Dunno how many times I've said it. It's not a 50/50 split so the power loss is nothing like an EVO or WRX.

My car runs r34 gtr drivetrain, other than the gearbox. As the transfer case is a clutch pack I would have thought it was a straight 50/50 split on power, but from my experience the dyno displays slightly more to the front wheels than that. No idea why.

As I stated earlier he sets up the Edge dyno with .7 correction in awd to keep it in line with other awd dyno's in the area. As he runs the rwd cars at .9 for the same reason you will lose 20% off the bat in AWD. Bit of a pita for me as I swap rwd/awd constantly, and makes it hard to know what the gains are.

lol my point was more than splitting hairs over 10rwkw doesn't mean much @ 440rwkw when you put a 5% variance on it for different dynos for instance :)

Plus a GTR isn't AWD... Dunno how many times I've said it. It's not a 50/50 split so the power loss is nothing like an EVO or WRX.

That would be a good start I think.

If you aren't happy - then look at dumping a whole wad of cash... But bear in mind you will be spending quite a major amount for say, 20-30rwkw extra.

Hence being fixated on a number can be your own worst enemy

True that about being fixated on a number it does do your head in. I will go for 400awkw with my -5's or as high as it will then i will go down the single route.

Get your e85 setup done first and sort the fuel side of things and go for a proper tune on your -5's you will be quiet suprised at the results.

As nismoid said I cant justify spending that much money for a whole new turbo + single turbo manifold + gate to change to something that will net you an extra 40kw at most. If I was in your shoes and going for a big single when Im already sitting at the low 400kw mark I would shoot for 500+ and dont expect blistering quick response, otherwise the twins will keep you more than happy.

Also what clutch and box are you running? Budget for this as well, especially the gearbox as OEM item's arent generally happy getting smashed at 8000rpm when your motor is making more than twice the power it came out of factory.

Your absolutely right about the Price vs Result it a very expensive step. I will properly go with a stroker kit when i go down the single turbo route. Yeap i know that stock gearboxes are notorious for blowing up, my gearbox is stock with a twin plate clutch and i know without a doubt that i will blow it up. Gearbox will be definitely upgraded when it blows up.

how long have you ahve the -5s on and whats makes you want to change when you ahvent even had them tuned?

E85, Solid internals that you have, -5's on 25+psi should net you well into the 400+ kw range.

seeing as you have everything set up, get a tune done then see its real potiential before going the other route.

I havent had the -5's for to long, but i have been in single turbo skylines and it just blew my mind lol. As i said before im going to max out TT set up first then i will be going single.

He has tuned a few M35's, mine is the only white one though. I'm there every second weekend as I can't stop fiddling with my setup.

My car runs r34 gtr drivetrain, other than the gearbox. As the transfer case is a clutch pack I would have thought it was a straight 50/50 split on power, but from my experience the dyno displays slightly more to the front wheels than that. No idea why.

As I stated earlier he sets up the Edge dyno with .7 correction in awd to keep it in line with other awd dyno's in the area. As he runs the rwd cars at .9 for the same reason you will lose 20% off the bat in AWD. Bit of a pita for me as I swap rwd/awd constantly, and makes it hard to know what the gains are.

Yeah it was more than likely to be you. My car is a regular over there aswell white 32 with xd9's. The car "feels" faster when i flick it into RWD mode from a rolling start, it "feels" like it pulls alot harder esp in 3rd and 4th but it could be my mind fooling me.

Edited by Sedat

Definitely your mind, in 4th there is hardly any power being sent to the front.

Off the line however totally different. It'll also feel faster rolling as there is no forward pull, its all rear push :)

Anyway have a crack at what you have, go for a belt in the hills, post results/thoughts :)

Definitely your mind, in 4th there is hardly any power being sent to the front.

Perhaps GTR's run a different controller, in awd the Stagea definitely runs around 50% (4th gear wot) according to the dyno.

On the road could be different, perhaps the gtr doesn't work off engine load but more Gforce from the sensor?

Yeah but what is the torque gauge actually doing?

It's definitely tied into the G-Sensors as it has a fit if one isn't working right (similar to fitting ETS controllers and adjusting how it works).

Perhaps yours is more full-time. Would be very interesting if it was, and I've learned my interesting piece of info for the day

ATTESA E-TS system is used in the following models:

R32 and R33 (1989-1997) GTS4 Skyline

GT-R - 1989–2003

Nissan Stagea

A31 Cefiro

1997-2003 Infiniti QX4

Infiniti G35x/G37x/Nissan Skyline (V35 & V36)

Infiniti M35x/45x/37x/56x/Nissan Fuga

Infiniti FX

Infiniti EX/Nissan Skyline Crossover (with Active Brake Limited Split for side-to-side torque split, as needed)

Nissan Cedric (Gloria\Cedric with RB25DET engine)

ATTESA E-TS Pro system is used in the following models:

R33 (1995-1997) Nissan Skyline GT-R (offered as a factory option)

R33 Nissan Skyline GT-R V-spec

R34 (1998-2002) Nissan Skyline GT-R (all models)

ATTESA E-TS Pro (GT-R version) is used in the following model(s).

2008+ Nissan GT-R

Edited by sydking

Perhaps GTR's run a different controller, in awd the Stagea definitely runs around 50% (4th gear wot) according to the dyno.

On the road could be different, perhaps the gtr doesn't work off engine load but more Gforce from the sensor?

That's because on the dyno the ATESSA is thinking the car is constantly wheelspinning so it sends power to the fronts. On the road unless you are making big power you will not be getting a speed difference from front to back wheels

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...