Jump to content
SAU Community

Recommended Posts

Hey guys not sure where else to put this so here it is.

I've recently got myself a new gopro hero hd 2. Have filmed a bit of footage on it but its been mostly 4x4 slow pace stuff using the suction cup mount.

Just wondering if anyone has one of these (I got the motorsports edition kit, with the suction cup). I was chasing feedback from anyone who has used this particular mount for high speeds motorsport. It has the 3m sticky pads but don't want to stick them all over my car if I don't have to.

Would appreciate feedback.

Maybe also a place where ppl can post up some footage filmed off there go pros

Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/
Share on other sites

Check that out i had 2 go pro's mounted on my car one on the inside mounted to cage and the other on the roof with suction cap, both were rock solid 145mph and full RPM launches didn't phase them highly recommend them.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/#findComment-6463822
Share on other sites

Using it for powercruise mate so hopefully reaching speeds of 200+. I know qr is rough but im guessing rally is worse lol. I just wasn't keen on 400 bucks worth of camera falling off my car and getting run over. Hey nur33 that link wont open on my tablet but will check it out, god I love ur car I read the article in hpi I think it was a few months back.

Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/#findComment-6464052
Share on other sites

I've used the 3pod Camzilla at all kinds of tracks - including a 220kph pass @ oran park. Just make sure it's on a good clean flat section and go for it.

BTW - the lower the angle the "faster" things appear. I have one of those 3M pads in the front intercooler air intake area - always looks great!

Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/#findComment-6464162
Share on other sites

Get the double suction mount (way better stability) from here:

http://www.camzilla.com.au/products/suction-mounts

and get the GoPro accessory from here:

http://www.camzilla.com.au/products/mount-accessories

Just ordered both of these, thanks heaps for the link. Definitely considering buying a second go pro to do the dual videos. Love the idea of mounting one in the front mount area would be sweet and fast.

Wat editing programs do u use, tried using windows movie maker as it was already on my comp but it was painful to do so.

Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/#findComment-6464185
Share on other sites

i mostly use my gopro for stills these days (point and shoot fisheye camera ftw!) but I recorded a little bit with it. i used the imovie app on my mac, not the best app, but does the job for simple edits...

Edited by Jay019
Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/#findComment-6464412
Share on other sites

I use Corel Video Studio for editing. The big key is that it is way easier to learn than premier or final cut pro (pro level editing software). It is a mid range package around $120 (buy on-line!). Does the job pretty well for us amatures.

As for slow motion - do a bit of research. I'm saving up for a new GoPro Hero 2 - it does 120fps in 480p. Slow that down to 30fps and get 4x slow motion. The trick with slow motion is to get software that can pull the frames out so you don't lose them. A lot of software just holds a frame for 3-4 times longer giving jerky motion.

Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/#findComment-6466661
Share on other sites

  • 1 month later...

I have searched go pro and this thread.... didnt come up lol but found it so thought to ask advice here rather than start a new thread.

Ive just bought an HD Hero 2 Motorsport also. After hiring one for a track day from pezhead I decided to buy my own. Scored it for $269!! I have taken some footage on it just around the house and the footage is very jerky and grainy when I play it on the computer. I have it set to 1080 and using a 16gb sandisk extreme up to 45 mb/s card. Also the footage I received on disc from my track day is the same. The promo video on the gopro website is unreal quality. Whats going wrong? Could it be as simple as needing a better Graphics card in the computer? I did try the disc footage on another PC which was grainy but smooth.

If anyone knows please help. Thanks

Liam

Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/#findComment-6553705
Share on other sites

Yeah it'll be a codec issue most likely on the PC itself.

MPC-HC is where it's at (Media Player Classic - Home Cinema), out of the box it'll probably be ok actually without any codecs.

You get a zillion options with MPC-HC as well if you want to do post processing and so real time on without the need to run it via video editing packages. Packages obviously do a better job, depends what you want etc.

All the go pro stuff I have looks perfect right off the card

Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/#findComment-6561468
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...