Jump to content
SAU Community

Recommended Posts

Hey guys not sure where else to put this so here it is.

I've recently got myself a new gopro hero hd 2. Have filmed a bit of footage on it but its been mostly 4x4 slow pace stuff using the suction cup mount.

Just wondering if anyone has one of these (I got the motorsports edition kit, with the suction cup). I was chasing feedback from anyone who has used this particular mount for high speeds motorsport. It has the 3m sticky pads but don't want to stick them all over my car if I don't have to.

Would appreciate feedback.

Maybe also a place where ppl can post up some footage filmed off there go pros

Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/
Share on other sites

Check that out i had 2 go pro's mounted on my car one on the inside mounted to cage and the other on the roof with suction cap, both were rock solid 145mph and full RPM launches didn't phase them highly recommend them.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/#findComment-6463822
Share on other sites

Using it for powercruise mate so hopefully reaching speeds of 200+. I know qr is rough but im guessing rally is worse lol. I just wasn't keen on 400 bucks worth of camera falling off my car and getting run over. Hey nur33 that link wont open on my tablet but will check it out, god I love ur car I read the article in hpi I think it was a few months back.

Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/#findComment-6464052
Share on other sites

I've used the 3pod Camzilla at all kinds of tracks - including a 220kph pass @ oran park. Just make sure it's on a good clean flat section and go for it.

BTW - the lower the angle the "faster" things appear. I have one of those 3M pads in the front intercooler air intake area - always looks great!

Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/#findComment-6464162
Share on other sites

Get the double suction mount (way better stability) from here:

http://www.camzilla.com.au/products/suction-mounts

and get the GoPro accessory from here:

http://www.camzilla.com.au/products/mount-accessories

Just ordered both of these, thanks heaps for the link. Definitely considering buying a second go pro to do the dual videos. Love the idea of mounting one in the front mount area would be sweet and fast.

Wat editing programs do u use, tried using windows movie maker as it was already on my comp but it was painful to do so.

Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/#findComment-6464185
Share on other sites

i mostly use my gopro for stills these days (point and shoot fisheye camera ftw!) but I recorded a little bit with it. i used the imovie app on my mac, not the best app, but does the job for simple edits...

Edited by Jay019
Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/#findComment-6464412
Share on other sites

I use Corel Video Studio for editing. The big key is that it is way easier to learn than premier or final cut pro (pro level editing software). It is a mid range package around $120 (buy on-line!). Does the job pretty well for us amatures.

As for slow motion - do a bit of research. I'm saving up for a new GoPro Hero 2 - it does 120fps in 480p. Slow that down to 30fps and get 4x slow motion. The trick with slow motion is to get software that can pull the frames out so you don't lose them. A lot of software just holds a frame for 3-4 times longer giving jerky motion.

Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/#findComment-6466661
Share on other sites

  • 1 month later...

I have searched go pro and this thread.... didnt come up lol but found it so thought to ask advice here rather than start a new thread.

Ive just bought an HD Hero 2 Motorsport also. After hiring one for a track day from pezhead I decided to buy my own. Scored it for $269!! I have taken some footage on it just around the house and the footage is very jerky and grainy when I play it on the computer. I have it set to 1080 and using a 16gb sandisk extreme up to 45 mb/s card. Also the footage I received on disc from my track day is the same. The promo video on the gopro website is unreal quality. Whats going wrong? Could it be as simple as needing a better Graphics card in the computer? I did try the disc footage on another PC which was grainy but smooth.

If anyone knows please help. Thanks

Liam

Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/#findComment-6553705
Share on other sites

Yeah it'll be a codec issue most likely on the PC itself.

MPC-HC is where it's at (Media Player Classic - Home Cinema), out of the box it'll probably be ok actually without any codecs.

You get a zillion options with MPC-HC as well if you want to do post processing and so real time on without the need to run it via video editing packages. Packages obviously do a better job, depends what you want etc.

All the go pro stuff I have looks perfect right off the card

Link to comment
https://www.sau.com.au/forums/topic/405770-go-pro/#findComment-6561468
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...