Jump to content
SAU Community

Recommended Posts

hi all,

i was wondering if anyone know of a cheap transport mob to bring a non running r33 from caroline springs VIC to loganholme QLD.

The best price i got so far is about 1200.................gasp

so any help or ideas would be most appriciated.

thanx..

Link to comment
https://www.sau.com.au/forums/topic/406513-need-car-towed-from-vic-to-brissy/
Share on other sites

that price seems dam good, Ive been getting qotes here in sydney, Cheapest is $400 for 152 KM.......

yea i spose it is, its jus alot of cash but with the price of fule these days i guess its bout right.

If you can get a car and trailer it would obviously be cheaper but massive drive. $1200 sounds pretty reasonable.

yea i ended up buying a cheap 97 land rover with gas running and with tow bar.

i will borrow my mates trailer next week n do the trip, once i'm back i will either flog off the land rover or keep it as a tow vehicle.

i did the sums and i'm gonna end up payin jus a lil bit over half of what i was quoted at the end of the trip, providing i flog off the land rover...

I paid $400 to get a flat-bed from byron to brisbane, about 200k's.1

So I'd say $1200 is pretty good.

yea your right, i spose i wasnt prepared to hear 12 to 15 hundred, would hate to kno what it costs brisbane to perth....lol

Well I ended up buying a 96 land rover disco V8i, 5speed, Dual fule, towbar for 2 grand.

I am going to borrow a mates trailer and go a pick up a GTS4 in Vic.

Once I get back to brissy, I have a mate who is going to buy the disco.

So at the end of the day getting my new car from Vic is going to only cost me the price of gas, If all goes well.

kgrhqrhjc4eqz6wobqcqi0g.jpg

t2ec16hhjfoe9nh6qs4ybqc.jpg

Edited by anikee

Well I ended up buying a 96 land rover disco V8i, 5speed, Dual fule, towbar for 2 grand.

I am going to borrow a mates trailer and go a pick up a GTS4 in Vic.

Once I get back to brissy, I have a mate who is going to buy the disco.

So at the end of the day getting my new car from Vic is going to only cost me the price of gas, If all goes well.

^^ These 4 words pretty much sum it up!

Good luck dude.

Well the luck lasted. 4 Days on the road, over 3,000km traveled, fule (LPG) cost under $750.

The original plan was to pick up a R33 GTS4 Rollin shell from Caroline Springs, VIC but after looking around for a donk, I found a RB25DE Motor a suburb away at MHC Performance for $500. So I got the rolling shell towed to MHC as we were heading down to VIC and Nat placed the motor in ready for us to pick up the car from his workshop when we arrived.

In the end it was a big saving to drive down and tow it myself, I was lucky in buying a reliable tow vehicle but also for my friend to buy it off me once my purpose done. (risky but paid off)

part1345160695596.jpg

Edited by anikee

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...