Jump to content
SAU Community

Recommended Posts

except they have a 140 treadwear, I am looking at them for my 34 after Ash mentioned them and I looked into them, they look gun, but what is the life span of them for someone that uses them day to day and not just as a weekender as I would be, so if someone that HAS USED them could give a idea of KMs that would be great

the KU36s are more "street" then "track" where the RS-3s appear to be the other way around

Where would one find said A050s ?

interesting that the INVOs have 2 different tread ratings

They don't really have two different tread ratings. They will, in reality, only have one tread rating, because the treadwear rating (correct term) on a tyre is actually measured by using the tyre. They drive it around a test course and compare the wear to the reference tyre which is also driven around the same course. If the tyre lasts exactly as long as the reference tyre, it gets a 100 rating. If it lasts 3 times as long, it gets a 300 rating. Really easy.

The Rs-3 simply has a soft compound on one side and a less soft compound on the other. It's been done before on many other tyres. A lot of tyres also have variable tread compound as the tyre wears down. This is to try to keep their behaviour the same as the tread blocks get shorter and stiffer (and squirm less). I think the first one of these I can remember was the A-509. That's a looooooooooooooooooong time ago.

when i was looking at the R1R's they have a treadwear rating of 140 and the tyre shop said to expect around 14-20,000kms depending on alignment/use etc (eg track work, burnouts), so RS-3's should be around that sorta life? although does seem abit high for a soft tyre ....

^are they similar to the ku36? Or different tyre altogether?

KUs are not worth the money IMO.

They were ONLY a viable choice when they were cheap. They are cheap no longer as I can only assume the subsiding from Kumho has stopped (same as what Bridgestone were doing with the RE55 R-comp for a long time)

Only is these could be shipped out the US...

very expensive to buy local

Depends where you go. I got a great deal locally, and I did compare pricing to the US.

RRP on any tyre in Aus is rubbish. I was looking at Bridgestones, and trade was $100+ cheaper than RRP per tyre.

except they have a 140 treadwear, I am looking at them for my 34 after Ash mentioned them and I looked into them, they look gun, but what is the life span of them for someone that uses them day to day and not just as a weekender as I would be, so if someone that HAS USED them could give a idea of KMs that would be great

the KU36s are more "street" then "track" where the RS-3s appear to be the other way around

Where would one find said A050s ?

interesting that the INVOs have 2 different tread ratings

Most user reviews I read before buying them rated 15-20k kms out of them with a few track days included.

Depends on your usage. Most tyres don't like to be heat cycled heaps, so if you do 5 track days they could be toast after 10k kms.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...