Jump to content
SAU Community

Recommended Posts

  • Replies 139
  • Created
  • Last Reply

Top Posters In This Topic

Hot off the press is the news that the [cabin] Drag Combat Final to be held at WSID this Saturday will feature some of the biggest names in Sport Compact racing in Australia.

The Sydney round in February of this year saw Mario's GTR700 storm through the traps for an 8.449 sec quarter and most thought it was the last time they'd see this record breaking car in AUS running at full noise. Guess again! Croydon this morning confirmed that GTR700 along with the DEVLSH 200SX from their workshop would be racing at the final D.C. event.

Combine this with the rotary pace of PAC, MAZFIX and JOE and throw in Gary Myers the BURNOUT KING HIMSELF and it's set to be a showdown of epic proportions.

Skylines Australia will also have a number of its members there for both show'n'shine and drag racing events so make sure you come and say hi and, if you get there early enough, speak to Dan (Majanal) about club membership.

Gates open at 10am for spectators and the cost of entry is only $25 for a full day of drag racing.

See you there!

Adrian Hodgson

[2RISMO]

Direct From Qld

Mazfix Twin Turbo Rx7 -

Damien Mckern - Grumpy Rx2

Stanley Kreis - Bushpig Cortina

Nsw

Peter Flynn's Pontiac

Gtr 700

Devlsh 200sx - World's Second Fastest 200sx

Croydon's Xr6

Plus Over 100 Expert Class Cars !

Mazsport Rx7

Barb9z Gemini

Queen St Ytub Rx3

Rotormaster K&n Rx7

6sence Rx7

Autostyle

Skylines Australia

Bakar Arja Dbronx Wrx

Mc Racing / Trp Wrx - Currently World's Fastest Wrx

Jr 101 200sx

Esp Gold Supra

Diablo Wrx

8th Sin Supra

Evilrx Wrx

Gary Meyers Burnout Mustang

Got my confirmation today via snail mail from Autosalon [cabin]... Lets go racing:Bang:

Yep - that was it - Did you see my second run when smoke started pissing out my gearbox ???

That was the clutch melting :P

That is one fine looking Line dude. Im sure I've seen it on the street at sometime somewhere.. Looking forward to meeting some more SAU members there..

Dude , I already put my mate Mick down as pit crew and I can only do one - Sorry man.

Dan, if it comes down to it - get the club to pay for your entry fee as you will be there on offical business.

Very worst case scenario - we can meet you outside

Should be able wangle something for you




  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...