Jump to content
SAU Community

Recommended Posts

Hi all

Ive got both options available at the mo as both are available in full kit form locally

however the turbo kit has no ecu,so what do you suggest for the piggyback?

Or should i go the blower which has the a/m ecu? Decisions!?!

Link to comment
https://www.sau.com.au/forums/topic/407102-supercharged-vs-turbocharged/
Share on other sites

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

what is your power goal?

Uprev for the ECU will work as long as you keep the AFM, even if upgraded AFM and will be most probably the cheapest/easiest solution.

Are you doing work yourself or handing it over to a workshop? Budget? Location?

i have a mate who has done the supercharger kit on a vq35de and has worked on lots of turbo cars before, as hes a mechanic

im in perth and no-one really does v35s over here. im a boilermaker so exhaust fab is no issue.no set budget as such.

leaning toward turbo kit cos its garret with hks pipes intercooler etc. any feedback much appreciated, might buy it tomorrow.

saw the kit, was mint and the price was too good not to buy it

so i did :yes:

brand new garret with hks gear even chucked in the auto upgrade for free

stoked- install next week 350hp here i come

Nice, got any pics? How are you tuning it?

the kit is an HKS special turbo system kit gt3037 56t

i can get a perfect power smt8 ecu for nothing, is this an anyway decent unit? or should i buy something else?

tuning at a mates workshop, its not what you know........... :rolleyes:

it has instruction manual in japanese but i know someone.... also the kit is made for a vq35de so shouldnt be a big issue

my car has a nismo a/m exhast and i know a guy who wants to swap mine for his coz he took a turbo kit off his putting it back stock to sell.

i know a guy with big injectors for sale if required and i have nismo irridium plugs in it looking into afm now

You will probably need colder plugs anyway. Do you have the number of the ones you put in?

I can get Bosch 1000's that drop straight in and idle perfectly for around $600 new, so don't pay too much for second hand ones, in fact I would be buying new anyway.

Your mate is going to be pissed with you, it isn't an easy kit to fit. Probably easier to pull the engine. Any idea what boost you plan to run? Has the tuner worked on VQ's before?

You might know a lot of people- But I installed that kit, got the tuning software, and made it run. On a car it was never designed for. So I know exactly what you have to change.

All I hope is that the people you know have some decent knowledge about VQ35des and turbos. Otherwise it'll never make it off the dyno. I suggest you research some more.

yeah hes done a vq with a vortek blower kit install in a 350z. My turbo guru has 15yrs exp with snails and charges in cartons of beer :no:

If he doesnt know it its not worth knowing so im in good hands.Im planning on 7psi at this stage cos thats what the previous guy ran on his.

Any thoughts on the perfect power smt8?

cheers

As PN-Mad said ther are many better options,

Haltech Platnium Pro (new one swaps the ecu completely), old one plugs into it <---- One of these prob the best option ~$2600 new, $1400 2nd hand from usa

Utec with MAP sensor <--- piggy back but also acts like a standalone after certain RPM <---- Pre Osiris was the best affordable EMS, $1000new (no longer made), $450/500 2nd hand from usa

Uprev Osiris <--- Cable and software to flash your stock ECU, good for a upto certain HP, but you need upgraded MAF $600 new, 2nd hand varies $400ish - there are more $ types like tuning model or something

The Haltech and Utec both run MAP sensors which you use instead of the MAF sensor.

Haltech is a must for another over 500HP id say

Utec is good if you like the extra like external map selector, boost controller etc and good for up to 500HP, maybe more

Osiris i dont know what HP this is good for...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
×
×
  • Create New...