Jump to content
SAU Community

Recommended Posts

Hi

I thought I would put up my findings from looking into fitting a short nose R200 LSD into a long nose diff, After looking on the net I didn't find all the info I was after

The centre will fit etc, the problem is one of the R30 axels are to short to engage the LSD on one side, to use the short nose axel flange setup you will compromise the oil seal as they are a different diameter by a few millimetres.

My conclusion was to make it work I would need to spend some time on the lathe modifying the shaft etc and cost as much as a aftermarket centre. I decided to go with a Quaife centre and cost the same amount with no stress.

Enjoy

Steve

Was this using mr30 trailing arms? or hr30?

I'm also assuming you're talking about a factory viscous LSD too?

Viscous LSD's are mostly old and worn out now anyway, so I wouldn't bother with one.

But I can't see the oil seal problem being a costly issue. Was it possible to use the short nose seal in the long nose housing, to match the short nose flanges? If not, then turning up a pair of new oil seal rings for the short nose flanges shouldn't cost much. My local machinists would charge $50 or less for that.

If you are using mr30 trailing arms you will need to change the flange on there to match the larger cv's, either 4 bolt hr30 or make a 5 or 6 bolt one to match short nose cv's. Then use 4 x inner cv's with the appropriate flange on either hr30, z31 or custom shafts.

My conclusion is that it is possible with a bit of mucking around but only worth it for the right LSD center, I wouldn't bother with a viscous for any diff.

I was playing with a R32 clutch type centre with Z31 shafts, it is posable but I decided it wasn't worth my time. I thought I might share the finding as I wasn't able to get this info on the net. I just like to do things the long way around first then invest in good parts when I have had enough.

i was going to do the conversion my self but ended up buying a Cusco mz lsd from import monster for 500 fits the factory r200 cv from a dr30

model LSD162, only thing u need to do i to buy some reduces for the crown wheel holes from 12mm to 10mm but thats easy

  • 3 months later...

Hey guys.

im doing a track day in my dr30 on sunday and my longnose r200 lsd has decided it wants to be 1 wheel drive! i have to pull it down tonight but i belive it is a nismo or cusco lsd (not fitted by me) if this is the case i naturally dont want to weld it! if its standard i may?? the reason im posting this here is that i have a ca18det shortnose lsd with shims complete and im trying to figure if there is someway i can use it? if the centres fit can i just weld the ca diff and use my r30 cv shafts? please give me some direction as diffs in general are far from my strong point!

as far as im aware every dr30 long nose is lsd, when mine started to peg one, i just replaced the original clutch packs, and added a extra four, theres a spacer in the hemi u remove to allow this, been working fine for a few years now, pre load was around 85 f/p by memory.

stwewart wilkins sells the upgraded ones btw

i looked at doing the same thing lots of stuffign around

ur better of going on import monster u can buy a Cusco Rs or MZ second hand center that fits factory R30 r200 cv for like $600 dleivered

ok so i took it apart tonight.. its a mechanical 2way unsure of brand?? the two outer most clutch plates on both sides have a concave bend to them which seemed odd (i was going to reassemble those plates the other way around..) other than that there appears to be no damage to it which is a little curious im lead to believe i may have the wrong oil in it (this all started when i changed the oil) anyone know what a mechanical 2 way should run?

and any other feed back and tips? anything i should look out for?

its not hard to set up a diff as long as u keep ur shins just like they came out and u dont stuff around the the pinion

So you have a VISCOUS LSD you have brought in from Japan for $600.00 and you're putting it in a long nose housing?????????

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey crew, Failed my WOF cause of a lower control arm, and I've decided to hit both arms, and also the compression rods at the same time(seems they're gonna be the most likely upcoming failure points from some discussions with the lads over on the G35 reddit). I've looking at these form Z1:  https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-compression-rod-p-40716.html https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-lower-control-arm-p-40674.html I asked Z1 if they'd work as it's the same platform, just RHD vs LHD. I basically got told "Lol dunno". Specifically they aren't aware of any difference but can't guarantee fitment as they haven't done it on a 350GT. So guess I'm asking is if there is any issues with using 2005 G35 coupe suspension parts on a 2005 350GT coupe? Orginally I thought it could be something in the way of the arms that each control arm is designed to be positioned around, but that'd be an engineering nightmare for Nissan needing two different shaped control arms 😅
    • ^ This. The mode door actuator is a common failure, as is the actuator and/or the actual valve for the coolant flow control valve. I also don't know how available the mode door actuator is these days. I've been meaning to look into it and get one from wherever is possible, to keep in the shed for the rainy day when mine eventually fails. Anyway, the advice to you is to search the usual NOS part supply places, or even just go to Nissan and see what they list.
    • Have you got a pic of the actuator? My guess is that unit has failed internally and was flopping around, so the previous engineer who owned it forced it to be fully open to cold air (blocking the heater core path). As far as you can tell, is anything else wrong in the system? Likely you just need a new actuator (not sure how available they are) and then "installation is the reverse of disassembly"
    • I'm happy with the Lsailt unit that I put in, it puts full Android on the top screen so you can run whatever Nav and other Apps you want, while still existing inside the factory functionality like automatic reverse cams, audio input switching, retains factory bluetooth etc. Not cheap and the install was moderate (not simple, not hard) Yours is a V36 not V37 though right?
    • Yeap, all the NC's that I originally looked at that had a hard top were PRHT, which makes the roof line look horrible, hence why I said nope to them My only caveat for another MX5 was it needed to have a hard top, and initially I didn't think you could get a detachable hard top for the NC,  like my NB had Again, a big thanks to Matty for helping me source the detachable hard top for my little girl, they are as rare as hens teeth in Australia, and the few people who have them, keep them Also to Greg, for initially pointing me in the NC direction NC PRHT 🤢🤮 Not mine (I really should take more photos of my car), but a NC with the detachable hard top 😁 To me, the difference in how the detachable hard top roof line looks, and how it actually follows the bodies lines, like they do on NA's and NB's, is chalk and cheese compared to the bulbous looking PRHT  
×
×
  • Create New...