Jump to content
SAU Community

Recommended Posts

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

RS4S = manual.

So if it has a gear stick and clutch, it's an S :)

RS4V = slusher.

There are some other differences such as the triple gauges in front of the gear stick, RS4S badge, skinnier rear track on the S and I believe the S has more power (206kw vs ~170kw ) but I'm certainly not 100% sure about this one.

Not sure what your budget is, but RS4S' go for about half the price of the 260rs'.

You can get a good RS4S for ~$10k whereas a good 260rs will set you back ~$18k-20k

You get more for your money, of course, such as the RB26 (although some might suggest an RB25 neo is preferred over an RB26 but that's for another thread) and big brakes, but $8k-$10k is a lot of coin.

They are both 206kw stock. Well that's quoted power figures.

26s have more scope for power, stock, but Neos have an arguably better head design which helps to narrow the capacity deficit.

Also 25s are cheaper to mod as you either need only one turbo or you don't need to spend the money making it single turbo, so you're ahead from step one.

EDIT: But there is a lot of subjectivity around this issue, so listen to arguments from both sides before deciding.

EDIT #2: for ~$5k you'll get an RS4S to eat a stock 260rs. HG/GT3076, injectors, fuel pump, ECU, AFM, fitting and tune and you've got a solid 300rwkw and a stock 260rs destroyer. Go E85 and, yeah, well the results posted all over the place speak for themselves. 340rwkw (that's ~550hp engine :woot:) figures are being seen with lots of mid range and "area under the curve" which means lag is under control. Of course, all this is doable with an RB26 but you either need more coin for two turbos/AFMs or spend the not inconsiderable amount of cash to go to a single turbo.

Edited by Cowboy1600

whats the stock power compaired between the 2 and if you were to put in a lil bit of coin could you make rs4s go better and what kind of things would make this possible

Stock is usually about 160 awkw. My Rs4 cost $4500 but I have spent about $15k on it where it now has better brakes, suspension and more power than a stock 260RS

If you can't find or afford a 260RS you can get there just the same with a S2 neo building it as you can afford it

how does the gear box ect on a rs4s hande an increase in power is that something else that would need to b done

I believe the Stagea manual box is the same as the GTR. The transfer case on the auto is inferior to the GTR one but I would expect (but don't know for sure) that the manual transfer case would be the same as the GTR.

C34 stags have the plethora of R33/R34 parts to play with! Despite what some will have you believe, the c34's arent that heavy really, there is all of about 80kgs difference from the skyline GTR's! To drive, they are very similar (well with some minor handling mods they are)! M35's VQ motor is very good and even atmo makes really impressive power, but mods are harder & manual would be a mission to achieve! I think of the 35's as more the VIP route. My pick if i was to do this again would have been the RS4S Dayz! Ive got the s1 RS4V, but mine has since snowballed into an epic build from just a mild tweak, haha and the s2 RS4S would have saved me some $ & time! Go the 260RS if money is of no concern, but for the savings the RS4S is a better deal! Although personally, I like the s1 dayz front the most & if your going to go nuts then it doesnt really matter what version you get! Have fun & enjoy!

the c34's arent that heavy really, there is all of about 80kgs difference from the skyline GTR's!

If you compare it to another heavy car like the GTR then yes they are heavier again and if you drive them four up and some luggage.....

Compared to a GTS-t which tips the scales about 400kg lighter then I don't think it is a bum steer to call them heavy considering they are running the same engine. If ever a car should have come with an RB30DET this is it.

But we all love em anyway.

Here are some comparative weights (~Kg) for the different models!

R32

gtst 1280

gtr 1400-1480

R33

gtst 1390

gtr 1530

R34

gtt 1410

gtr 1536

V35

1520-1580

R35

1730-1770

C34

s1 1620

s2 1650

M35

nm 1680-1720

pm 1670

Despite the GTR's getting heavier with each model, they also lapped the Nordschleife quicker each time (ie: weight isnt everything)!

I think comparing it to the Skyline GTR's is a fairer comparison, seeing as they are more closely related to the gtr, than the gtst/gtt, although they are somewhat of a hybrid hunchback cousin of the two!

Wolverine, mine now has the RB30DET!!! :D

Edited by Zorro

I am comparing the Stagea to my R33 GTS-t since they are more or less the same engine and I know exactly how each feels in traffic. GTR's are doggy by comparison to a GTS-t off line as well unless you get serious and/or start sidestepping the clutch.

The RS4S weighs much more than 1620kg, how much extra weight HICAS and the man sized drive shaft is worth beats me but it was well over 1700kg on the weighbridge.

Once they are rolling they go fine never get and argument from me on that score. Off the line the weight hurts them. No one can run and hide from that fact, be it 200kg more 300kg more or 400kg more.

Zorro I imagine the RB30 has transformed the car into what it should have been from factory.

That isn't what either of my car weighs.

The squiggly line means roughly. Those were off the top of my head and proved to be not too far out.

So, now to be precise its 1650 vs 1390. 260kgs is a long way from 400. Of course they won't be as spritely as a GTST, but that's not a long way off. Also, the Stags have a Neo vs your non-neo R33 which helps close the gap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...