Jump to content
SAU Community

Recommended Posts

Alright, I've currently got the stock exhaust with 3" cat back (gay as)...

I'm pretty retarded with cars, but slowly learning. Any advice would be fantastic.

Looking at going 3" turbo back.. Best to buy separately and fitted at an exhaust shop? Or buy through them?

Wanting something high flow, dont care about noise (quiet is fine) and will help power/overall sexiness

Also, should I aim to spend about $1k fitted??

Edited by tchard
Link to comment
https://www.sau.com.au/forums/topic/408446-c34-exhaust-upgrade/
Share on other sites

Just Jap is a forum sponsor they can supply both a dump/front pipe and a cat but I would go for a larger bodied cat if you want the least restriction.

Venom exhaust works and email George direct.

3" all the way through and you can't go too far wrong.

So google both of those, buy them and then take it to an exhaust shop asking them to fit 3" all the way through??

you've already got a 3in catback? So you just need the front pipe and 5in cat fitted.

http://www.venomexhaustworks.com.au/

Just Jap is in the merchants section of this website.

you've already got a 3in catback? So you just need the front pipe and 5in cat fitted.

http://www.venomexhaustworks.com.au/

Just Jap is in the merchants section of this website.

Ok great, that would make sense haha..

See i've learnt something today and it's only 7:40am!

www.justjap.com

if your car is auto try and get the jjr front and dump and the bend in it..

i got one for a 33/stagea but its was dead straight and had to be cut and welded to go around the gear box..

fun times!

mine is a manual... its not a car if you cant shift gears :P

you've already got a 3in catback? So you just need the front pipe and 5in cat fitted.

http://www.venomexhaustworks.com.au/

Just Jap is in the merchants section of this website.

it says the 500 is recommended for +350rwkw etc... is it still applicable for cars with less than those figures?

So google both of those, buy them and then take it to an exhaust shop asking them to fit 3" all the way through??

Dont worry about taking it to an exhaust shop. U wont learn anything that way. Buy urself a set of spanners, a pair of stands, a jack and change the front pipe and cat yourself. Its literally a dozen bolts. Even a total novice could knock it out in 1 day and it will save on the reaming u'll get from the exhaust shop.

Dont worry about taking it to an exhaust shop. U wont learn anything that way. Buy urself a set of spanners, a pair of stands, a jack and change the front pipe and cat yourself. Its literally a dozen bolts. Even a total novice could knock it out in 1 day and it will save on the reaming u'll get from the exhaust shop.

My mate reckons it'd be a nightmare job for a rookie like myself??

Also he reckons given the heat of the turbo, the bolts would be hard to get off??

Before ya start ripping into it get yourself some "Penetrene" or similar quality penetrant in a squirty bottle & some safety goggles. :yes:

Cheers GW

I gotta agree with that. A good penetrant will help. Mine came loose without it, but every car is different. Just allow yourself the whole weekend and u'll definately get it done. Just take the cat off 1st. Then work your way forward. Its alot easier from under the car so ull want to get it up on stands with enough room to move round. Take ur time and remember if u get frustrated u'll break stuff. So walk away, clear ur head and give it another go.

All of the above. It's good to have them on hand too for future DIY'S.

Also wondering if u got a hold of George? I've yet to get a reply from him..and it's been 2 days. I'll give him another day...I don't want to seem too keen.

Perhaps think about replacement nuts and bolts, gaskets, gasket goo etc before you tackle it....or at least make sure the nearest auto shop has things you might need in stock.

Thats a reminder! I usually change to stainless bolts on exhausts cos if u ever need to pull the exhaust off (which u will if ur on a hunt for power. Changing gearboxes and diffs etc.) they wont be rusted up. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...