Jump to content
SAU Community

How To Use Tiptronic?

gogglez-10

By gogglez-10,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Waino99 Contributor

Waino99

Posted
Posted

Yeah, took me about a week to figure that out! Thought they were for the stereo (as mine wasn't working when I got it)

Just to add a twist to the thread, what different techniques do people use to drive with there tiptronic?

Just smash through at open throttle

Or back off when you change

loymclure Proficient

loymclure

Posted
Posted

not being super awesome racecar driver or machanic ... id say open throttle as your ecu would provide retard for gear shift in tip tronic? but i could be wrong, i dont use the tip tronic at all.

RBPOWA-(TJ) Grand Master

RBPOWA-(TJ)

Posted
Posted

Yeah, took me about a week to figure that out! Thought they were for the stereo (as mine wasn't working when I got it)

Just to add a twist to the thread, what different techniques do people use to drive with there tiptronic?

Just smash through at open throttle

Or back off when you change

Just smash threw the gears at the limiter... hearing the stagea backfire was one of the coolest things of owning one...

and down shifting at high revs and hearing the burble and popping sounds out the back as the revs dropped got a few odd looks as people has no idea what was going on...

I tried the back off before changing.. but i felt it was way to rough on the gear box.. back off change gear slam for down.. didnt feel right to me..

Bad point was forgetting your in trip tonic mode and your on a long drive, as it down gears for you at a stand still.

Go to take of at the green 1st gear would be bouncing of the limiter real fast haha

Quick slap of the gearstick slingshots the car into second

0t1 Contributor

0t1

Posted
Posted

I use manual mode in my PM35 most of the time around town, I don't lift off on up shifts, downshifting is cool as the ECU takes care of rev matching for you.

I suffer the same bad point as RBPOWA. Still trying to figure out how to trick the ECU to allow brake and throttle to get the toque converter up to speed for launches.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      RH9 R32 GTR Build Thread

      By soviet_merlin · Posted

      Oof, I will forevermore have those shredded gears in mind whenever someone talks about showing mechanical sympathy towards their car. Thanks for the photos, fascinating stuff!
    • Dose Pipe Sutututu
      RH9 R32 GTR Build Thread

      By Dose Pipe Sutututu · Posted

      Curious to see how the SpeedTek stuff holds up
    • OST Micah
      RH9 R32 GTR Build Thread

      By OST Micah · Posted

      The holdups last year were drivetrain related. I had the car out right after getting the bearing issue resolved. Third launch and the car didn't move after releasing the clutch. It had sheared all the engagement teeth off the 1st gear.    Thankfully no other damage was done. I set an aftermarket gear beside an OEM gear and found that the engagement teeth on the OEM gear were much larger and better supported. Looking through my bin of spare transmission gears I found that there are two types of tooth on the OEM first gears - the larger tooth and the smaller tooth. It looks like most aftermarket gearset manufacturers base their design on the smaller tooth. OEM large tooth left - Speedtek, OS Giken, etc or OEM small tooth right Decided to give that larger engagement tooth a try. Pressed the ring off an OEM gear and sent it to a transmission manufacturer here in the States. They did their "faceplating" operation with my synchro ring on the Speedtek gear.   I reassembled it, took it back to the track and promptly destroyed the gear itself.  I'll rebuild this and use it as a spare - thankfully just first gear and the countershaft are damaged beyond repair. Definitely disheartening but my welded on engagement tooth ring held up!  Moved to Speedtek's dog engagement design as the gears appear to be much stronger. So far they have taken much more abuse at the track. Also scored a Stillway lockout from the Netherands for super cheap. It's for some other RB transmission so it took a bit of fabrication to fit but honestly a very easy job. I also had to heavily modify the gates as they were very different.   Then for some reason at the last test and tune a silicon coupler below the throttle blew off and took out the radiator and fan. Thankfully it was in the burnout box and not down track. This car is really beating me up - I still haven't made a pass in it. Ran it through the gears many times on the street but it keeps biting me at the track.  Currently in the process of replacing the radiator and remaking the throttle pipe to remove the coupler and use a cast 90 and a vband. I WILL get this thing down the track...
    • Ozdavroz
      Dumb rich kid tries modding for the first time

      By Ozdavroz · Posted

      Covers most of the above points really. There's a few exceptions but most just see driving as an irritating but necessary task they must complete if they want to get anywhere on time. Also see it as a good time to show their awesome multi-tasking abilities on their mobile and/or doing their makeup.  
    • OST Micah
      RH9 R32 GTR Build Thread

      By OST Micah · Posted

      I don't believe I posted pictures of the second oil pump pickup I added so here they are. Data shows it gets oil pressure up to the relief pressure much earlier in the RPM. Is that important? Not likely... This was just another attempt to fix the bearing issues.   I also heavily opened up the inlet to the pump since it now had to flow oil from two pickups. I believe the diameter increased about 1/8".
×
×
  • Create New...