Jump to content
SAU Community

Recommended Posts

Hey guys,

i drive a manual 98' 34 NA, drove till the tank was empty and filled it up with 100 premium from united, which i pump regularly.

I got 450ish K's outta my tank before the light went on again.

Just wanna find out if you guys get more or less, is my lead foot too heavy or light?

Link to comment
https://www.sau.com.au/forums/topic/409290-how-many-ks-per-tank/
Share on other sites

Sounds about right to me, I think I get a bit less than that; probably between 400-450 when the light comes on (can drive around with the light on though, obviously).

I think I'm averaging 12L/100km or so... I pump 98 only. Not great :/.

Think should really be able to get 10-12. I granny around all the time as well, so dunno haha.

Edited by kaitoukid

Hey guys,

i drive a manual 98' 34 NA, drove till the tank was empty and filled it up with 100 premium from united, which i pump regularly.

I got 450ish K's outta my tank before the light went on again.

Just wanna find out if you guys get more or less, is my lead foot too heavy or light?

as i say in every fuel economy thread, the fuel light coming on is not a measure of economy as it will come on at a slightly different point in every car. you are best off just paying attention to how many ltires you put in and then using this, with how far you have travelled to calculate your exact fuel economy in Litres/100kms, as this will give you a better indication as to whether you are getting good or bad economy. someone elses light may come on with 5L more fuel in the tank, meaning that they would get about 50kms less than you, even though they may actually be getting the same fuel economy.

plus there are many variables in fuel economy. things like driving style, driving conditions (stop/start heavy traffic, or light flowing traffic. hilly areas. lots of short trips, etc)

The best fuel economy I got out of my R34 while it was NA was about 9.5L/100km

The worst was about 40L/100km :laugh:

Now that the car is turbo my average fuel consumption has actually improved (when I'm not thashing the hell out of it ;) )

its a 60L tank yes? so when the light comes on you've got say 10-15L still in there, i know for a fact i drove my car to the tuner with the light on and got there with it under the empty line , syphoned all the fuel out ( was doing Eflex) and i got 10L out of it

so if we said there was 10-15L left when you have done 450km then its actually very good economy and around the 10-12L/100km :yes:

450km = :cheers:

Edited by SliverS2

I did (I wasn't paying enough attention at 7am this morning lol)

About 420ks with 50L with my v8 commodore

And I drive it pretty damn hard + 99% of my driving is in peak hour

Helped by 1400rpm at 80km/h and it accelerates up hills like that

While that may seem thirsty, it's less than the skyline/supra/soarer

And runs 100% fine on 91 octane so the is a 15c/L saving right there :)

ahaha, yeah. coles and woolies fuel (including e10) all the way for my wagon. the most revs my car sees on the way to work is 2500rpm, and that's taking off from the lights. once i'm on the highway it doesn't go above 2000rpm, even when overtaking. got the trip computer to show over 1000kms to empty a few weeks back. that's a little bit optimistic though. i generally get about 670kms before the fuel light comes on, and about 750kms before i actually fill up (and there's still usually about 12 to 15L left in the tank). one day i will take a fuel tin with me and see just how far i can get before it runs out. i reckon i should be able to hit 900kms from the 75L tank. not bad for a hunk of shit with over 250,000kms on the clock

and because it's all highway driving, i do my oil changes at 15,000kms, and the oil still looks good.

You guys have to rev to 2500RPM? Stop revving so damn hard!

I only rev my coon to 2500, maybe 3000RPM if I want to go somewhere f**king quickly.

Otherwise, keep her below 2000RPM all the way, cruise at 100KM/H smack on 1500RPM... And it pulls hills at that :P

Oh, and freeway does 8L/100KM with 4 adults cruising at 110 - 120KM/H, with a few hits here and there.

You guys have to rev to 2500RPM? Stop revving so damn hard!

I only rev my coon to 2500, maybe 3000RPM if I want to go somewhere f**king quickly.

Otherwise, keep her below 2000RPM all the way, cruise at 100KM/H smack on 1500RPM... And it pulls hills at that :P

Oh, and freeway does 8L/100KM with 4 adults cruising at 110 - 120KM/H, with a few hits here and there.

This, except E39 528i. 1550rpm @ 100kmh. Freeway running 6.6-6.8L/100km. Ha.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
    • That's all good, I thought I was missing some interesting feature! Maybe @PranK can double check if that is something that is meant to be operating or not.
×
×
  • Create New...