Jump to content
SAU Community

Recommended Posts

Hey guys,

Ive decided to sell my well looked after R32 GTS-T, is in great condition.

  • Has 144XXX kms on clock!!
  • Serviced at every 5000kms.
  • Manual Transmission.
  • RB20DET.
  • Only Every filled up with BP ULTIMATE.
  • Gunmetal Grey paint, with Legit black GTR Bonnet and GTR grill.
  • GTR front bar (aftermarket)
  • GTR V-Spec II Boot (legit), with lip and wing.
  • Front mount intercooler.
  • Op6 R34 GTT Turbo.
  • Full 3" Turbo back exhaust with Hi-flow Cat.
  • Nistune.
  • GFB Boost Controller.
  • Very dark tinted windows.
  • Bilstein Shocks.
  • King springs.
  • Aircon & heater works perfectly.
  • Was tuned by Trent and Cat at Chequerred Tuning.
  • Everything work as from factory.

Had an oil leak from the front main seal, just recently (on the 19 Sep 2012) got it fixed - set me back $1000, for new seals and water pump and cambelt!

If u know me, u know how well i take care of my cars, one drive and u will see.

Sound system in atm will be removed when sold, but doors are sound deadened.

Wheels will not come with sale (cheap wheels anyways) i have the stock wheels in black paint with near perfect tires on them.

Car dynod in at 176rwkw, drives absolutely perfect, was slowly building it to oneday drift it, but as u can see its too nice to drift and that would kill it.

Has been my daily driver for the past few years, but reecently sold my business and have commenced studying again and need a car I can leave at the train station without worrying that my beloved r32 will get stolen, scratched or broken into etc.

THE BAD POINTS

Car needs paint on the roof as it is a bit oxidized. The car is from 1992, so paint isnt going be absolutely perfect.

There is a small dint near the fuel cap, where the previous owner had given his car to his mechanic and the mechanic reversed the car into a pole, Probably cos the tint is so dark haha

Will provide RWC, but to do so will need to remove tint.

Asking $10K with RWC.

$9.5K Without RWC. As this saves time and i dont have to mess around having to remove tint and organise RWC. will put some more pics up as soon as i get a chance. I will be overseas from 26th sep to 10th Oct, so if u contact me between then, please be patient and ill get back to u asap.

Car is 100% roadworthy other than tint.

Reg Expires 21 Nov 2012.

Please, no tire kickers.

I have the stock exhaust and stock turbo that i can include in sale if sells for asked price.

I am currently looking for an EG Civic, cheap run around car, body doesnt have to be immmaculate but needs to have rego, come Rwc, have aircon, heater, be manual and have vtec. (preferred motors D15B Stage 3 vtec, B16A, B16B, B18C (engineered only). Engine must be registered to car.

Thanks.

Marcus.

0415 038 232.

http://www.skylinesa...5010_285039.jpg

^^^small dint pic^^^

Edited by Widesays
Link to comment
https://www.sau.com.au/forums/topic/409798-fs-r32-gts-t-1992-rb20det/
Share on other sites

Car also has Z32 AFM and K&N panel air filter.

Here's some more pics and a quick walk around video I took yesterday (22nd Sept. 2012).

Video:

Pics:

http://www.skylinesaustralia.com/forums/uploads/gallery/album_5010/gallery_88630_5010_1637804.jpg

http://www.skylinesaustralia.com/forums/uploads/gallery/album_5010/gallery_88630_5010_1281097.jpg

http://www.skylinesaustralia.com/forums/uploads/gallery/album_5010/gallery_88630_5010_1724308.jpg

http://www.skylinesaustralia.com/forums/uploads/gallery/album_5010/gallery_88630_5010_921259.jpg

http://www.skylinesaustralia.com/forums/uploads/gallery/album_5010/gallery_88630_5010_1568342.jpg

http://www.skylinesaustralia.com/forums/uploads/gallery/album_5010/gallery_88630_5010_561508.jpg

http://www.skylinesaustralia.com/forums/uploads/gallery/album_5010/gallery_88630_5010_22487.jpg

http://www.skylinesaustralia.com/forums/uploads/gallery/album_5010/gallery_88630_5010_553248.jpg

http://www.skylinesaustralia.com/forums/uploads/gallery/album_5010/gallery_88630_5010_920757.jpg

http://www.skylinesaustralia.com/forums/uploads/gallery/album_5010/gallery_88630_5010_142684.jpg

http://www.skylinesaustralia.com/forums/uploads/gallery/album_5010/gallery_88630_5010_298170.jpg

http://www.skylinesaustralia.com/forums/uploads/gallery/album_5010/gallery_88630_5010_157750.jpg

http://www.skylinesaustralia.com/forums/uploads/gallery/album_5010/gallery_88630_5010_567962.jpg

http://www.skylinesaustralia.com/forums/uploads/gallery/album_5010/gallery_88630_5010_882140.jpg

http://www.skylinesaustralia.com/forums/uploads/gallery/album_5010/gallery_88630_5010_626716.jpg

Went a bit nuts on pics, but its hard capture how clean and well looked after this car is.

  • 3 weeks later...
  • 2 weeks later...
  • 3 weeks later...

Spoke to the guy before, he got defected and had to get his mechanic to sign a stat dec declaring that the intercooler was using factory mounts or something, obviously it has a hole cut for the cooler piping so his mechanic doesn't know what he is doing :closedeyes:

Just thought I'd let people know in case they thought he had the cooler engineered.

Edited by eightsixboy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
×
×
  • Create New...