Jump to content
SAU Community

Recommended Posts

Nissan skyline R33

Car is a 1993 model, factory fitted Rb25det & manual 5 Speed.

Another feature of this car is its fitted with an Active LSD rear diff, rare factory option found in series 3 GTR's

Looking for $10k Firm as is, but price is negotiable im happy to take $8k for the car minus the 2 Front Recaro seats & Brembos, Factory items will be supplied.

Rego and RWC will be supplied with sale so the new owner can just drive it away ready to transfer into their name,

Rego remaining is 11 and a half months so roughly 12th september 2013.

If you need to contact me for anything, my number is 0432544363 (please contact me via my number as im not always on SAU)

Car is located in St Albans 30 minutes west of melbourne CBD

Specs listed below:

-162xxx kms

-Matte black paint job done 3 months ago

-Lowered 40mm (legal height)

-RB25DET & 5 speed manual

-Brembo brakes from GTR v-spec

-19x9.5 & 19x10.5 varrstoen wheels

-Series 3 GTR xenon projector headlights (custom fitted)

-Complete GTR interior, inc. Seats & door trims

-New exedy HD clutch good for 300rwkw

-11 months rego

-RSR exhaust (sounds really tough)

post-59775-0-25576000-1348502060_thumb.jpgpost-59775-0-62873700-1348502073_thumb.jpgpost-59775-0-90733500-1348502081_thumb.jpgpost-59775-0-80103400-1348502090_thumb.jpgpost-59775-0-68757900-1348502099_thumb.jpgpost-59775-0-27520400-1348502108_thumb.jpgpost-59775-0-34949900-1348502117_thumb.jpgpost-59775-0-47049800-1348502129_thumb.jpg

Edited by RJ06

Hey mate what offsets are you running on the varrstoens? How much did you have to flare the fenders to accommodate this fitment too (any rubbing issues as well)? Have you had any issues with the car over your ownership?

Genuinely interested.

Hey mate what offsets are you running on the varrstoens? How much did you have to flare the fenders to accommodate this fitment too (any rubbing issues as well)? Have you had any issues with the car over your ownership?

Genuinely interested.

Hey buddy wheels are +12 offset both front and rears, Guards were flared approx 20mm to suit wheels.

The only rubbing issue is with the front guard liners, which rub only on full lock and scrubbing from big bumps on the road. Rears dont rub on the guards at all.

Only problem ive had since being on the road was a defect due to the car having an exhaust which is a little bit too loud for their liking, long story short went through the Burnley tunnel in Melbourne and police handed me a defect.

Bump!

Wheels are no longer for sale. Comes with some 17"s with good tires.

10k come and get it!

9.5k if sold this weekend!

Also forgot to mention Roadworthy certificate has been obtained so it has another 28 days from now until it expires! :)

Not in a rush to sell it anymore guys, and for those low balling me dont bother.

Going to put the price to $11,000 complete or $9500 without the wheels.

Thanks guys! :)

Looks like good stuff. I'm usually not a big fan of matte black on cars as I think the colour kindda makes the car looks like a old shit box. But this 1 really changes my thoughts :) good luck!

Looks like good stuff. I'm usually not a big fan of matte black on cars as I think the colour kindda makes the car looks like a old shit box. But this 1 really changes my thoughts :) good luck!

Thanks for the kind words buddy! :)

  • 2 weeks later...
  • 1 year later...

If I wasnt happy with my own ride, i'd be pretty keen to get this, sounds pretty neat.

I wanted to know where you got the series 3 headlight and how they needed (or the car) to be modded to suit? I have a series 1.5, has the series 1 front end like yours looks to. And i really want this sort of head lights. Cheers.

I know this is old, i want to know about parts used on this vehicle to purchase them for my own!
I'm keen to find a set of headlights like used on this one.
Obsessive was the only muppet asking about the wheels. Pete33r was asking about where the lip was purchased.

Info on the headlights would be greatly appreciated.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...